Kenwood VZ-5000, Инструкция по эксплуатации

Страница: 13 / 80

English 13
Remote Control Function
REMOTE CONTROL UNIT
RC-402
MODE SP
AME
OPEN
AV OUT
FNC
BAND
V.SEL
TUNE
SEEK
V.SEL
AV OUT
AME
SP
+
–
4
¢
SEEK
BAND
FNC
OPEN
MODE
Loading and Replacing the Batteries for the
Remote
Do not set the remote on hot places such as above
the dashboard.
1. Use two "AAA" batteries.
Slide the cover while pressing downwards to
remove it as illustrated.
2. Insert the batteries with the
ª
and
·
poles
aligned properly following the illustration inside
the case.
Store unused batteries out of the reach of children.
Contact a doctor immediately if the battery is
accidentally swallowed.
• The provided batteries are intended for use in
operation checking, and their service life may be
short.
• When the remote controllable distance becomes
short, replace both of the batteries with new ones.
2
WARNING
2
CAUTION
Monitor Control Function
3
Opening the Monitor
Press the [OPEN] button.
3
Switching the Monitor’s Picture
Press the [V.SEL] button.
Each time the button is pressed the monitor’s picture
switches.
3
Switching the AV Output Mode
Press the [AV OUT] button.
Each time the button is pressed the AV out mode
switches.
3
Selecting the Setup Menu Screen
Press the [FNC] button.
Source Control Function (Common operation)
3
Switching the TV/Video Screen Mode
Press the [MODE] button.
Each time the button is pressed the screen mode
switches.
3
Volume
Increasing Volume
Press the [+] button.
Decreasing Volume
Press the [–] button.
3
Switching the Speaker Mode
Press the [SP] button.
Each time the button is pressed the built-in speaker
mode switches.
TV Control Function
3
Selecting the Preset Band
Press the [BAND] button.
Each time the button is pressed the preset band
switches between the TV1 and TV2.
This function available during the KTC-V500N or KTC-
V500P is connected.
3
Selecting the Channel
Press the [
4
] or [
¢
] button.
This function available during the KTC-V500N or KTC-
V500P is connected.
3
Selecting the Seek Mode
Press the [SEEK] button.
Each time the button is pressed it switches between
the AUTO1, AUTO2 and Manual seek mode.
This function available during the KTC-V500N or KTC-
V500P is connected.
3
Auto Memory Entry
Press the [AME] button.
This function available during the KTC-V500N or KTC-
V500P is connected.
Not Used
English