
20
EN
Recording
3
Press and hold the DIM M ER key for more than 2 seconds to select
the A-REC or M -REC mode during digital input.
1
Rec mode off : The digital input record mode is sw itched off.
2
A-REC mode
: The digital input signals (DTS, Dolby Digital, or
PCM ) are ident if ied aut om at ically and
converted into stereo signals that are ready for
recording.
3
M -REC mode : The input signal type at the moment this
mode is selected is held throughout this
mode.
For A-REC mode:
For M -REC mode:
4
Start playback, then start recording.
• If the audio reproduction stops in the middle due to change in the
input signals, etc., press the
DIM M ER key.
Recording audio (analog sources)
INPUT SELECTOR
Recording a music source
1
Use the INPUT SELECTOR knob to select the source (other than
“M D/ TAPE”) you w ant to record.
2
Set the M D or TAPE recorder to record.
3
Start playback, then start recording.
Recording video
1
Use the INPUT SELECTOR knob to select the video source (other
than “VIDEO 1”) you w ant to record.
2
Set the video deck connected to VIDEO 1 to record.
• Select the REC M ODE to record a digital input source.
3
Start playback, then start recording.
• Recording may not be normal for some video softw are. This is due to
the copy guard condition.
‡
Recording audio (digital sources)
Sw itch on the
REC mode to record a digital input source.
Usually use the
A-REC (Auto-Record) mode to record audio input
sources. When the digital mode changes during recording in the
A-REC
mode, the audio input source may be interrupted momentarily.
Recording music in A-REC or M -REC mode
INPUT SELECTOR
DIMMER
1
Use the INPUT SELECTOR knob to select the source (CD/ DVD,
DVD/ 6CH or VIDEO 2) you w ant to record.
2
Set the M D or TAPE recorder to record.