
18
EN
Listening to a source component
1
Use the INPUT SELECTOR knob or keys to select the source
you w ant to listen to.
The input sources change as show n below :
1
“AUX”
2
“TUNER”
3
“CD/ DVD”
4
“TAPE” or “M D”
5
“VIDEO1”
6
“VIDEO2”
7
“DVD/ 6CH”
2
Start playback from the selected source.
3
Use the VOLUM E CONTROL knob or VOL +/– keys to adjust the
volume.
Normal playback
Some preparatory steps are needed before starting playback.
Turning on the receiver
1
Turn on the pow er to the related components.
2
Turn on the pow er to this receiver by pressing POWER ON/
STANDBY key.
Selecting the input mode
If you have selected a component connected to the
CD/ DVD, VIDEO 2
or
DVD/ 6CH jacks, make sure that the input mode setting is correct for
the type of audio signal to be used.
8
Selecting M D/ TAPE
Select the source name corresponding to the component connected to
the M D/TAPE jacks. The initial factory setting is
“TAPE”. To change the
source to
“M D”, follow the steps below :
1
Use the INPUT SELECTOR knob to select “TAPE”.
2
Hold dow n the AUTO key for more than 2 seconds.
• The source indication changes to
“M D”.
• To return to the original indication, repeat procedure
2
.
Setting the speaker status
Press the SPEAKERS ON/ OFF key to sw itch the speakers on or off.
Preparing for playback
The speaker indicator lights up.
4
¢
+
+
+
INPUT SELECTOR
VOLUME CONTROL
Input
Selector
VOL
INPUT SELECTOR
POWER
ON/STANDBY
SPEAKERS
ON/OFF
AUTO