
19
EN
Normal playback
Adjusting the sound
Adjusting the TONE (remote control only)
You can adjust the sound quality w hen the receiver is in the PCM stereo
and analog stereo mode.
1
For the remote control, press and hold the TUNER key for more
than 3 seconds to sw itch to receiver mode.
2
Press the Tone key to select the TONE mode.
3
Use the M ULTI CONTROL knob or M ulti
%
/
fi
key to select TONE
ON/ OFF.
4
When in TONE ON selection, press the Tone key for the follow ing
displays.
BASS
: Select this to adjust the low frequency range.
TREB
: Select this to adjust the high frequency range.
5
Use the M ULTI CONTROL knob or M ulti
%
/
fi
keys to adjust the
sound quality.
• The bass and treble levels are adjustable from -10 to + 10 in 2 step
increments.
Once-touch low frequency emphasis (Bass Boost)
(remote control only)
You can adjust the sound quality w hen the receiver is in the PCM stereo
and analog stereo modes.
Press the Bass Boost key.
• Press the key once to select the maximum (+ 10) low frequency
emphasis setting.
• TONE w ill automatically be turned ON.
• This key does not function w hen the receiver is in the sound quality
or ambience effects adjustment mode.
£
~
¶
Sw itching back the previous setting
Press the Bass Boost key again.
Adjusting the LOUDNESS mode (remote control only)
You can adjust the Loudness function w hich controls the low volume
settings to maintain the music’s richness. The adjustment can be made
w hen the receiver is in the PCM stereo and analog stereo mode.
Press the Loudness key to turn the LOUDNESS setting ON.
To cancel
Press the Loudness key again so that the “LOUDNESS” indicator
goes off.
M uting the sound
The
M UTE key lets you mute the sound of the speakers.
Press the M UTE key.
To cancel
Press the M UTE key again so that the “M UTE” indicator goes off.
• M UTE ON can also be deactivated by turning the volume control
knob.
ACTIVE EQ mode
You can enjoy a more impressive sound effect w hen ACTIVE EQ is
turned ON during Dolby Digital and DTS playback and, w hen in PCM and
analog stereo mode
Press the ACTIVE EQ key for the follow ing selections;
1
ACTIVE EQ M USIC
: Effective w hen listening to music.
(The ACTIVE EQ LED indicator lights up.)
2
ACTIVE EQ CINEM A : Effective w hen w atching a movie.
(The ACTIVE EQ LED indicator lights up.)
3
ACTIVE EQ TV
: Effective w hen w atching TV.
(The ACTIVE EQ LED indicator lights up.)
4
ACTIVE EQ OFF
: The ACTIVE EQ function is turned OFF.
(The ACTIVE EQ LED indicator goes off.)
• ACTIVE EQ function w ill not be available w hen REC M ODE, AUTO
TUNING or PRESET M EM ORY is ON and during 96kHz LPCM
playback.
Listening w ith headphones
1
Press the SPEAKERS ON/ OFF key so that the speaker indicator
goes off.
• If you turn off all of the speakers w hen in surround mode, the
surround mode w ill be canceled as w ell, resulting in stereo playback.
2
Connect headphones to the PHONES jack.
PHONES
3
Use the VOLUM E CONTROL knob or VOL + / – keys to adjust the
volume.
M ake sure the SP indicator is turned OFF.
4
¢
+
+
+
ACTIVE EQ
VOLUME CONTROL
PHONES
MULTI CONTROL
SPEAKERS ON/OFF
MUTE
Loudness
Tone
Bass Boost
Active EQ
Mute
Multi
%
/
fi
VOL