6
BASIC OPERATIONS
S
WITCHING
P
OWER
ON/ OFF
Press
to switch the transceiver ON.
• A beep sounds and the display illuminates.
• If the Transceiver Password function is programmed, “PASSWORD” will appear on the
display. Refer to “Transceiver Password”, on page 6.
Press
again to switch the transceiver OFF.
■
Transceiver Password
To enter the password:
1
Press / to select a digit.
• When using a keypad, simply enter the password digits and proceed to step 4.
2
Press
C>
to accept the entered digit and move to the next digit.
• Press
A
or
#
to delete an incorrect digit. Press and hold
A
or
#
to delete all
digits.
3
Repeat steps 1 and 2 to enter the entire password.
4
Press
S
or
to confirm the password.
• If you enter an incorrect password, the transceiver remains locked.
A
DJUSTING
THE
V
OLUME
Press the
Volume Up
key to increase the volume. Press the
Volume Down
key to decrease the
volume.
If Squelch Off has been programmed onto a key, you can use that function to listen to background
noise while adjusting the volume level.
S
ELECTING
A
Z
ONE
AND
C
HANNEL
/G
ROUP
ID
Select the desired zone and channel/group ID using the keys programmed as
Zone Up
/
Zone Down
and
CH/GID Up
/
CH/GID Down
.
•
You can program names for zones and channels/group IDs with up to 10 characters.
■
Home Channel/Group ID
You can select your Home channel/group ID by pressing
Home CH/GID
. Press the key a second
time to return to your previous channel/group ID.
■
Direct Channel/Group ID
You can quickly select a commonly used channel/group ID by pressing
Direct CH/GID 1
~
Direct
CH/GID 4
. Press the same key a second time to return to your previous channel/group ID (if the
key assignment Direct CH/GID return is configured as “Enabled”).
