13
1
Select your desired zone and channel.
2
Press the key programmed as
Status
or
S Status
.
• When pressing the
Status
key, the target Fleet/ ID is fixed and cannot be
selected. Skip to step 5 to continue.
3
In Selcall mode, press / (if the key assignment list selection is configured as “Enabled”) or
<B
/
C>
to select the ID of the station you want to call.
• You can also enter the station ID directly by using the keypad.
4
Press
S
to enter Status mode.
5
Press / (if the key assignment list selection is configured as “Enabled”) or
<B
/
C>
to select
the status ID you want to transmit.
• You can also enter the status ID directly by using the keypad.
6
Press
the
PTT
switch or
■
to initiate the status call.
■
Receiving
When a status call is received, the
icon will flash and the calling ID or text message will appear
on the display. Press any key to return to normal operation.
■
Reviewing Messages in the Stack
1
Press and hold the key programmed as
Stack
,
Selcall
,
Status
, or
S Status
.
2
Press / (if the key assignment list selection is configured as “Enabled”) or
<B
/
C>
to select
your desired message.
3
Press to return to normal operation.
S
HORT
/L
ONG
M
ESSAGES
To send and receive short or long messages, connect the transceiver to a PC. (Ask your dealer for
details.)
• Short messages can contain a maximum of 48 characters. Received short messages
are displayed the same as Status messages and are stored in the same stack memory.
A combined maximum of 15 Status calls and short messages can be stored in the stack
memory.
• Long messages can contain a maximum of 4096 characters and can only be viewed via
a PC.
GPS R
EPORT
If a GPS unit (NMEA-0183 format) is installed on your transceiver, you can press the key programmed
as
Send the GPS data
to send your location data.
