Kenwood TK-360G, Руководство по обслуживанию

Страница: 13 / 57

TK-360G/(N)/370G/(N)
12
REALIGNMENT
No. Function Choices Display Remarks
Select 1-128 _1-_1._ [
3
] : Group selection/
Channel _1-128._ Channel selection change
Select 1-128 _1.-_1_
Group 128.-_1_
1 RX frequency Step 2.5kHz-1MHz STP_250 Display when an item is selected
STP_1000 or when a step is changed
(about 0.5 seconds)
[
•
] Step change
UHF : 5.0,6.25kHz,1MHz,Step
Blank R. ———— [Side1] : Freq On/Blank switching
100.0000- R.100.0000 The rightmost dot indicates
550.0000MHz 50Hz digit (On=5; Off=0).
2 Rx Signaling OFF ———— [Side1] : Off/QT/DQT switching
QT 67.0-250.3Hz QT_67.0_ [
•
] : Mode switching
(EIA Mode) QT_250.3_ [
°
] : Normal/Inverse
QT 67.0-250.3Hz QT_67.0* switching
(0.1Hz Step Mode) QT_250.3*
DQT 000-777 (Normal) DQT000N*
(1 Step Mode)
DQT777N*
DQT 023-754 (Normal) DQT023N
(Standard Table Mode) DQT754N
DQT 000-777 (Inverse) DQT000I*
(1 Step Mode)
DQT777I*
DQT 023-754 (Inverse) DQT023I
(Standard Table Mode) DQT754I
3 TX frequency Step 2.5kHz-1MHz STP_250 Same as RX frequency.
STP_1000
Blank T. ————
100.0000- T.100.0000
550.0000MHz
4 TX Signaling Same as RX signaling.
5 Option Signaling OFF NONE____
Default
DTMF DTMF____
2-TONE 2TONE___
6 ID 000- ___ID___ Display when an item is selected
9999999999 (about 0.5 seconds)
12345678 Display of the current setting
(If it is 8 or more digits, scroll it.)
——987 Display when a code is input
(Input it with DTMF key.)
Blank ———— [Side1] : Data clear
7 Busy Channel NO BCL_NO__
Default
Lockout Type 1 BCL_1___ BCL_YES for K, K4, E, (N)E type
Type 2 BCL_2___ N/A for K, K4, E, (N)E type
8 Beat shift No SHFT_NO_
Default
Yes SHFT_YES
9 RF Power High Power PWR_H___
Default
Low Power PWR_L___
10 Wide/Narrow Wide WIDE_
K, K4, M, M4, destination only
Narrow NARROW_
Wide 5K Wide -W5K
E destination only
Wide 4K Semiwide -W4K
11 Scan DELETE SCAN_DEL Not used for TK-360G
Delete/ADD ADD SCAN_ADD
Default
12 Priority No P.CH_NO__ Not used when (Scan) Priority is not Fixed.
Channel Yes P.CH_YES_
13 Home Channel No H.CH_NO__ Not used when Home Channel is
Yes H.CH_YES_ not set in Key Assignment.
14 Compander No COMP_NO_ Not used when Wide is selected.
Yes COMP_YES
15 PTT ID OFF P.ID_OFF
Begin of TX P.ID_1
End of TX P.ID_2
Both
P.ID_3
16 Begin of 000- _BOT_ID_ Not valid if Dial ID =Disable and
TX ID 9999999999999999 PTT ID=OFF, or EOT is set.
Display when an item is selected
(about 0.5 seconds)
12345678 Display of the current setting
(If it is 8 or more digits, scroll it.)
——987 Display when a code is input
(Input it with DTMF key.)
Blank ———— [Side1] : Data clear
17 END of 000- _EOT_ID_ Not valid if Dial ID=Disble and
TX ID 9999999999999999 PTT ID=OFF, or BOT is set.
Display when an item is selected
(about 0.5 seconds)
12345678 Display of the current setting
(If it is 8 or more digits, scroll it.)
——987 Display when a code is input
(Input it with DTMF key.)
Blank ———— [Side1] : Data clear
No. Function Choices Display Remarks
8-2. Channel Setting Mode
This is a mode for making channel settings with the panel
keys without using the FPU.
Pressing [Side2] when "SELF" is displayed, sets Channel
Setting Mode.
Select an item set using [
3
] then change the selection with
the encoder.
The data displayed using [
2
] is stored in the memory and
then proceeds to the next item. Pressing [
3
] proceeds to
the next item without storing it in the memory.
Press [Side2] to set the display to "SELF" and return to reset
(default) status.
All channel data is cleared when pressing [
2
] key with the
blank RX frequency.