Kenwood TK-360G Скачать руководство пользователя страница 38

Страница: 38 / 57

TK-360G/(N)/370G/(N)

ADJUSTMENT

Test Mode (TK-370G only)

■

Test mode operating features

This transceiver has a test mode. To enter test mode, press

the [

] key and turn the power on. Hold the [

] key until the

test channel No. and test signalling No. appear on LCD. Test
mode can be inhibited by programming. To exit test mode, switch
the power on again. The following functions are available in test
mode.

• Controls

[PTT]

Used when making a transmission.

[Side2]

Monitor ON and OFF.

[Side1]

Changes wide and narrow.

[

]

Sets to the Tuning mode.

[

•

]

Unused

[

]

RF power HIGH and LOW.

[

]

Changes signalling.

[O] to [9],

Used as the DTMF keypad. If a key is pressed

and [#],[

∗

]

during transmission, the DTMF corresponding

and [A] to [D] to the key that was pressed is sent.
[ENCODER] Changes channel.

• LCD indicator
“LO”

Lights at RF Power Low.

“ ”

Lights at monitor ON.

• LED indicator
Red LED

Lights during transmission. Blinks during low
battery voltage warning.

Green LED

Lights when there is a carrier.

Repair Jig (Extention Flat cable : part No.

E37-0851-05)

This cable is used for connecting the TK-370G display unit
and TX/RX unit when you test or repair the transceiver.

Caution :

You must connect TK-370G display unit when you
test or repair the transceiver.

Extention Flat cable

Display unit

TX/RX unit

■

The following parts are required for adjustment

1. Antenna connector adapter

The antenna connector of this radio uses an SMA terminal.
Use an antenna connector adapter [SMA(f) – BNC(f) or

SMA(f) – N(f)] for adjustment. (The adapter is not provided as
an option, so buy a commercially-available one.)

Note

When the antenna connector adapter touches the knob,

draw out the knob to mount the connector.

Repair Jig (Chassis)

1. Jig (chassis : Part No. A10-4009-03) for adjustment.
2. Use the jig as follows.

Place the TX-RX unit on the jig and fix it with thirteen
screws

Solder the antenna terminal of the TX-RX unit.

3. Supply power from an external power supply.

Relay terminal : + (7.5)
Jig (Chassis)

: -

Relay terminal

(+)

Power module

UNIT

JIG

Coaxial antenna connector

Содержание TK-360G


























































Результаты поиска

Содержание TK-360G

Отзывы:

Похожие инструкции для TK-360G

Бренды по названию

Популярные бренды

Kenwood TK-360G, Руководство по обслуживанию

Результаты поиска

Содержание TK-360G

Отзывы:

Похожие инструкции для TK-360G

Бренды по названию

Популярные бренды