TK-2310R
7
REALIGNMENT
5-5. Item Setting Mode
In this mode, the selected item in the Item Selection
mode can be programmed.
When the [S] key is pressed in the Item Selection mode,
the transceiver enters the Item Setting mode.
The setup items for item setting mode are as follows
Setup item
Display
Remarks
1. RX frequency
1. RX FREQ
→
***.*****
Receive frequency
245.00000~245.98750MHz
2. RX signaling
2. RX SIG
TONE OFF/
QT ***.*/
DQT ***N/
Receive QT/DQT
3. TX frequency *1
3. TX FREQ
→
***.*****
Transmit frequency
245.00000~245.98750MHz
4. TX signaling *1
4. TX SIG
→
TONE OFF/
QT ***.*/
DQT***N/
Transmit QT/DQT
5. RF power Hi/Low
5. PWR ***
HI/LOW
6. Scan Del/Add
6. SCN ***
DEL/ADD
7. Beat shift on/off
7. SFT ***
ON/OFF
8. Compander on/off
8. CMP ***
ON/OFF
*1: The setting of the Receive is displayed.
Key operation
Key
Key Function
[Selector]
Changing the selection item (RX/TX frequency and
RX/TX signaling only)
[Side1]
No action
[Side2]
No action
[S]
• Store the current settings and return to the Item
Selection mode without backup.
• A MHz digit of the frequency blinks. (RX/TX fre
-
quency only)
• The icon of the current signaling configuration.
blinks. (RX/TX signaling only)
[A]
Abort the current settings and return to the Item
Selection mode without backup
[<B]
Toggle/Decrease the blinking value.
[C>]
Toggle/Increase the blinking value.
5-6. Self Programming Mode flow chart
■
Channel selection mode flow chart
Data password
[S]+Power ON
SLF.LOCK.R
or / and
Display
SLF.LOCK.W
SELF
I - I
Zone
Channel
Self programming mode
[S]
[S]
[A]
Channel selection mode
[S]
[A]
Zone selection
Channel selection
Item setting mode
[S]
Read authorization password /
Overwrite password entry (6 digits)
When the Read
authorization password is
set to the transceiver.
When the Overwrite
authorization password is
set to the transceiver.
[Selector]
[<B] : Zone/Channel number decrement
[C>] : Zone/Channel number increment
■
Item selection mode flow chart
Channel selection mode
[S]
[S]
[A]
1. RX frequency
[Selector]
[S]
[A]
2. RX signaling
[Selector]
[S]
[A]
3. TX frequency
[Selector]
[S]
[A]
4. TX signaling
[Selector]
[S]
[A]
5. RF power Hi / Low
[Selector]
[S]
[A]
6. Scan Del / Add
[Selector]
[S]
[A]
7. Beat shift on / off
[Selector]
[S]
[A]
8. Compander on / off
Item setting mode
[Selector]