Kenwood NX-5600HB, Руководство по обслуживанию

Страница: 39 / 102

(No.RA075<Rev.001>)1-39
 NXDN Mode signaling
RAN: Radio Access Number
PN9: Pseudo-Random Pattern
No.7, 9 Item: PC test mode only
4.3 Panel Tuning Mode
4.3.1 Transceiver tuning (To enter tuning mode)
To enter tuning mode, press the [ ] key while the transceiver
is in test mode. Use the [ ] key to write tuning data through
tuning modes, and the [

]/[

] key to adjust tuning
requirements (1 to 4096 appears on the LCD).
Use the [ ] key to select the adjustment item through tuning
modes. Use the [
] key to adjust 5, 6, 7 or 13 reference level
adjustments, and use the [

] key to switch between Wide/
Narrow/NXDN narrow.
 LCD display in panel tuning mode
4.3.2 Key operation
4.3.3 5, 6, 7 or 13 reference level adjustments frequency
 5 reference level adjustment
Sensitivity 1, Sensitivity 2, Sensitivity 3, Sensitivity 4, RSSI
Reference, Open Squelch, Low RSSI, High RSSI, Tight
Squelch
 6 reference level adjustment
High Maximum Power, Medium Maximum Power, Low
Maximum Power, High Transmit Power, Medium Transmit
Power, Low Transmit Power
 7 reference level adjustment
Balance, Maximum Deviation, NXDN High Deviation, QT
Deviation, DQT Deviation, DTMF Deviation, Single Tone
Deviation, MSK Deviation
No. RX TX
1 RAN1 RAN1
2 None PN9
3 RAN1 Maximum Deviation
Pattern
7 FSW + PN9 FSW + PN9
9 Tone Pattern (1031Hz) Tone Pattern (1031Hz)
Key Function
Push Hold (1 second)
[+] Volume up Continuation up
[-] Volume down Continuation down
[

] Adjustment value up Continuation up
[

] Adjustment value down Continuation down
[

] Auto adjustment start -
[

] Wide/Narrow/NXDN Overlap point switching
[ ] Shift to panel test mode -
[ ] To enter 5, 6, 7 or 13
reference level
adjustments -
[ ] Writes the adjustment
value -
[ ] Go to next adjustment
item (At the time of 5, 6, 7
or 13 point adjustment:
Adjustment point change) Back to last adjustment
item
An RAST 256
2.6
CV voltage, AD value, etc
Sub LCD
display
Low1
Adjustment point
Main LCD
display
Adjustment value
(1~4096)
Proper value guide
(When the frequency
adjustment is necessary,
or is displayed.)
Adjustment item
An: Analog narrow mode
Aw: Analog wide mode
Nn: NXDN narrow mode
Low1
Low2
Low3
Low4
Center1
Center2
Center3
Center4
Center5 High1
High2
High3
High4
[AUX
(Orange)] Output tone pattern
change of balance
adjustment (A change is
possible only during
balance adjustment.) -
[PTT]
(MIC) Transmit
[0] to [9]
and
[#],[ ]
(MIC) -
Tuning point Display RX (MHz) TX (MHz)
1 Low 1 39.050000 39.100000
2 Low 4 41.050000 41.100000
3 Center 3 44.050000 44.100000
4 High 1 47.050000 47.100000
5 High 4 49.950000 49.900000
Tuning point Display RX (MHz) TX (MHz)
1 Low 1 39.050000 39.100000
2 Low 4 41.050000 41.100000
3 Center 2 43.050000 43.100000
4 Center 4 45.050000 45.100000
5 High 1 47.050000 47.100000
6 High 4 49.950000 49.900000
Tuning point Display RX (MHz) TX (MHz)
1 Low 1 39.050000 39.100000
2 Low 3 40.050000 40.100000
3 Center 1 42.050000 42.100000
4 Center 3 44.050000 44.100000
5 Center 5 46.050000 46.100000
6 High 2 48.050000 48.100000
7 High 4 49.950000 49.900000
Key Function
Push Hold (1 second)