Kenwood NX-5600HB, Руководство по обслуживанию

Страница: 9 / 102

(No.RA075<Rev.001>)1-9
 Key operation (2/3)
*6 : [1] = "Low", [2] = "Medium", [3] = "High"
 Key operation (3/3)
Key
\Item
TX Signaling RX RAN TX RAN Transmit
Power
[ ] Decision Decision Decision Decision
[ ] Back to the previous item Back to the previous item Back to the previous item Back to the previous item
[ ] Unused Unused Unused Unused
[ ] Exit panel program mode Exit panel program mode Exit panel program mode Exit panel program mode
[

] Signaling number change RX RAN up TX RAN up Transmit power change
[

] Signaling number change RX RAN down TX RAN down Transmit power change
[

] Signaling type change RX RAN ON/OFF TX RAN ON/OFF Unused
[

] Signaling type change RX RAN ON/OFF TX RAN ON/OFF Unused
MIC Keypad
[0] ~ [9] Entry a Frequency directly Entry a code directly Transmit power select ([1],
[2] or [3])
*6
MIC
Keypad [*] Decision Decision Decision Decision
MIC
Keypad [#] Back to the previous item Back to the previous item Back to the previous item Back to the previous item
Key\Item Channel Name
[ ] Decision and exit the “Manual Entry mode”
[ ] Back to the previous item
[ ] Change the character type (Capital font
→
Small font
→
Numerical value)
[ ] Delete
[

] Character selection ("A", "a" or "0" to "Z", "z" or "9" )
[

] Character selection ("Z", "z" or " 9" to "A", "a" or "0")
[

] Move a cursor to the right
[

] Move a cursor to the left
MIC Keypad
[0] ~ [9] Character selection (Follow to the "Keypad Character Entry" in the FPU setting)
MIC Keypad [*] Change the character type (Capital font
→
Small font
→
Numerical value)
MIC Keypad [#] Delete