NX-210(G)
59
ADJUSTMENT
Item
Condition
Measurement
Adjustment
Specifi cations /
Remarks
Panel tuning mode
PC test mode
Test-
equipment
Unit
Terminal
Unit
Parts
Method
High RSSI
at –80dBm
adjust *8
[NXDN
Very
Narrow]
1) Adj item: [Nv
HRSSI]
Adjust:
[***]
2) Adj item:
[NvL
HRSSI]
→
[NvL’
HRSSI]
→
[NvC
HRSSI]
→
[NvH’
HRSSI]
→
[NvH
HRSSI]
Adjust:
[***]
SSG
output:
–80dBm
(22.4µV)
(MOD: 1kHz/±1.5kHz)
1) Adj item: [High
RSSI (NXDN Very
Narrow)]
2) Adj item: [Low],
[Low’],
[Center],
[High’],
[High]
SSG
output:
–80dBm
(22.4µV)
(MOD: 1kHz/±1.5kHz)
SSG
Panel
ANT
Universal
connector
[Panel tuning mode]
After input signal
from SSG, press
[ ] key to store the
adjustment value.
[PC test mode]
After input signal
from SSG, press
[Apply] button to
store the adjust-
ment value.
Adjust with the
analog signal.
*8: Because High RSSI at –80dBm (NXDN Narrow) is adjusted by adjusting High RSSI at –80dBm (Analog Narrow), it is not necessary to adjust
High RSSI at –80dBm (NXDN Narrow).
8. Tight
Squelch
adjust
(Squelch
level
9
adjust)
[Analog
Narrow]
1) Adj item: [An SQLT]
Adjust:
[***]
2) Adj item:
[AnL
SQLT]
→
[AnL’
SQLT]
→
[AnC
SQLT]
→
[AnH’
SQLT]
→
[AnH
SQLT]
Adjust:
[***]
SSG output: 12dB
SINAD level +5dB
(MOD: 1kHz/±1.5kHz)
1) Adj item: [Tight
Squelch (Analog
Narrow)]
2) Adj item: [Low],
[Low’],
[Center],
[High’],
[High]
SSG output: 12dB
SINAD level +5dB
(MOD: 1kHz/±1.5kHz)
SSG
Panel
ANT
Universal
connector
[Panel tuning mode]
After input signal
from SSG, press
[ ] key to store the
adjustment value.
[PC test mode]
After input signal
from SSG, press
[Apply] button to
store the adjust-
ment value.
[Analog
Wide]
1) Adj item: [Aw SQLT]
Adjust:
[***]
2) Adj item:
[AwL
SQLT]
→
[AwL’
SQLT]
→
[AwC
SQLT]
→
[AwH’
SQLT]
→
[AwH
SQLT]
Adjust:
[***]
SSG output: 12dB
SINAD level +5dB
(MOD: 1kHz/±3kHz)
1) Adj item: [Tight
Squelch (Analog
Wide)]
2) Adj item: [Low],
[Low’],
[Center],
[High’],
[High]
SSG output: 12dB
SINAD level +5dB
(MOD: 1kHz/±3kHz)