NX-210(G)
3
SYSTEM SET-UP
REALIGNMENT
1. Modes
User mode
Panel test mode
Firmware version information
Panel tuning mode
Data programming mode
PC test mode
PC tuning mode
PC mode
Clone mode
Firmware
programming mode
Mode
Function
User mode
For normal use.
Panel test mode
Used by the dealer to check the fundamen-
tal characteristics.
Panel tuning mode
Used by the dealer to tune the transceiver.
PC mode
Used for communication between the trans-
ceiver and PC.
Data programming
mode
Used to read and write frequency data and
other features to and from the transceiver.
PC test mode
Used to check the transceiver using the PC.
This feature is included in the FPU.
See pages 45 to 57.
Firmware program-
ming mode
Used when changing the main program of
the fl ash memory.
Clone mode
Used to transfer programming data from one
transceiver to another.
Firmware version
information
Used to confi rm the internal fi rmware ver-
sion.
Are you using the optional antenna?
Are you using the speaker microphone?
YES
Are you using the GPS function?
YES
KRA-43(G)
VHF Helical antenna
NO
NO
(Option)
(Option)
YES
KMC-41/KMC-42WKMC-51/KMC-52
Speaker microphone
Are you using the voice guide & storage unit?
NO
(Option)
See page 6.
YES
VGS-1
Delivery
Merchandise received
Choose the type of transceiver
Transceiver programming
A personal computer, programming interface (KPG-36A/36U),
and programming software (KPG-111D/111DN)
are required for programming.
(The frequency, and signaling data are programmed for the transceiver.)
Frequency range (MHz)
RF power
Type
TX/RX 136~174
5W
NX-210 (G) K2
KRA-22/KRA-26
Optional antenna
(Option)
NO