Kenwood KVT-935DVD Скачать руководство пользователя

Страница: 50 / 52

English

98 English

Troubleshooting Guide

What might appear to be a malfunction in your unit may just be the result of slight misoperation or
miswiring. Before calling service, first check the following table for possible problems.

■

General

The power does not turn on.

• The fuse has blown.

The desired source is NOT selected although you pressed the SRC button.

• An optional unit required to listen to each source is

not connected yet.

• The RESET button is not pressed yet although the

optional unit has been connected to the system.

• The "O-N" switch of the optional unit is at the "O"

position.

• A disc changer not supported by the system is used.

Nothing happens when the buttons are pressed.

• The computer chip in the unit is not functioning

normally.

No television/video image appears.

• The unit is not connected to the parking brake

detection switch.

• The parking brake is not engaged.

The screen is dark.

• The unit is in a location where temperature is low.

The screen does not darken when the vehicle’s lights are turned on.

• The unit is set to auto dimmer.

• The illumination wire has not been connected. (If

manual dimmer is set)

AM/FM radio reception is poor and/or there is noise.

• The TV antenna and vehicle‘s radio antenna are too

close.

The remote controller does not operate.

• The remote control mode selector is not set

correctly.

• After checking for short circuits in the wires, replace the

fuse with one having the same rating.

• A non-connected source is not selected. See <Connection>

(see page 88) and connect the unit correctly.

• Press the reset button (see page 4).

• Set the "O-N" switch to the "N" position.

• Use a disc changer supported by the system (see page 4).

• Press the reset button on the unit (see page 4).

• Make proper connections according to <Connection> (see

page 88).

• For safety reasons no television/video images are

displayed while the vehicle is moving. Engaging the
parking brake will cause images to be displayed.

• If the temperature of the monitor unit drops, the screen

may appear darker when power is first turned on due to
the characteristics of a liquid crystal panel. Wait a while
after turning power on for the temperature to rise. Normal
brightness will return.

• When the unit is set to auto dimmer, it is not linked to the

vehicle's light switch.

• Make proper connections according to <Connection> (see

page 88).

• Separate the two antennas as far as possible.
• Turn off the main unit.

• Switch the remote control mode selector according to the

source you select (see page 14).

English 99

No sound can be heard, or the volume is low.

• Attenuator is turned on.
• The fader or balance settings are set all the way to

one side.

• The input/output wires or wiring harness are

connected incorrectly.

The sound quality is poor or distorted.

• One of the speaker wires is being pinched by a

screw in the car.

• The speakers are not wired correctly.

Radio reception is poor.

• The car antenna is not extended.
• The antenna control wire is not connected.

The memory is erased when the ignition is turned off.

• The battery wire has not been connected to the

proper terminal.

• The ignition and battery wire are incorrectly

connected.

The TEL mute function does not work.

• The TEL mute wire is not connected properly.

The TEL mute function turns on even though the TEL mute wire is not connected.

• The TEL mute wire is touching a metal part of the

car.

The sound/picture skips on a DVD/VCD/CD.

• The disc is scratched or dirty.

A track will not play.

• Random play has been selected.

A VCD cannot be played using menus.

• The VCD disc being played is not compatible with

P.B.C.

The subtitle is not displayed.

• The DVD disc being played does not contain the

recording of subtitles.

The voice (or subtitle) language cannot be changed.

• The DVD disc being played does not contain the

recording of more than one audio (or subtitle)
language.

• Turn off Attenuator.
• Reset the fader and/or balance settings.

• Reconnect the input/output wires or the wiring harness

correctly. See the section on <Connection> (see page 88).

• Check the speaker wiring.

• Reconnect the speaker wires so that each output terminal

is connected to a different speaker.

• Pull the antenna out all the way.
• Connect the wire correctly, referring to the section on

<Connection> (see page 88).

• Connect the wire correctly, referring to the section on

<Connection> (see page 88).

• Connect the wire correctly, referring to the section on

<Connection> (see page 88).

• Connect the wire correctly, referring to the section on

<Connection> (see page 88).

• Pull the TEL mute wire away from the metal part of the

car.

• Clean the disc, referring to the section on <Disc cleaning>

(see page 6).

• Turn off random play.

• Menu playback is available only with VCD discs recorded

with P.B.C.

• The subtitle cannot be displayed when the DVD disc being

played does not contain the recording of subtitles.

• The voice (or subtitle) language cannot be changed when

the DVD disc being played does not contain the recording
of more than one voice (or subtitle) language.

Содержание KVT-935DVD





















































Результаты поиска

Содержание KVT-935DVD

Отзывы:

Похожие инструкции для KVT-935DVD

Бренды по названию

Популярные бренды

Kenwood KVT-935DVD, Инструкция по эксплуатации

Результаты поиска

Содержание KVT-935DVD

Отзывы:

Похожие инструкции для KVT-935DVD

Бренды по названию

Популярные бренды