Kenwood KS 100 G, Инструкция по использованию - Рекомендации по установке

Страница: 32 / 40

32
Operations to Be Executed for the Replacement of the Injectors of the Oven
and Grill Burners
Some models are provided with a set of injectors for the various types of gas.
If the injectors are not supplied they can be obtained from the “Service Centre”.
Select the injectors to be replaced according to the “Table for the choice of the injectors”.
The nozzle diameters, expressed in hundredths of a millimetre, are marked on the body of
each injector.
Oven Burner
−
Lift and remove the lower panel inside the oven.
−
Unscrew and remove the burner securing screw “ A ” (fig. 6.6).
−
Withdraw the burner as shown in figure 6.7 and rest it inside the oven. Take care not to
damage the safety valve probe and the electric ignition electrode.
−
Using a 7 mm box spanner, unscrew the injector (indicated by the arrow in fig. 6.7)
and replace it with a new one selected in accordance with the “Table for the choice of
the injectors”.
−
Regulate the air supply to the oven burner as indicated in the section “Regulation of air
supply to oven and grill bur-
ners”; then replace the burner
and the other components
repeating the above steps in
reverse order.
IMPORTANT: Check the
correct operation of the sa-
fety valve and the ignition
electrode.
A
Fig. 6.6
Fig. 6.7