Kenwood KS 100 G страница 11 Скачать руководство пользователя

Страница: 11 / 40

Cooking With Gas Oven

Before introducing the food, preheat the oven to the desired temperature.

For a correct preheating operation, it is advisable to remove the tray from the oven and

introduce it together with the food, when the oven has reached the desired temperature.

Check the cooking time and turn off the oven 5 minutes before the theoretical time to recu-

perate the stored heat.

Fan Motor

The fan motor is designed to distribute throu-

ghout the oven the heat generated by the

oven gas burner.

The fan motor can also be used without the

oven gas burner (without heating) to defrost

frozen foods.

The fan is controlled by a knob (fig. 2.7).

−

To operate the fan motor turn the knob

indicated in fig. 2.7 to position

−

To switch it off turn the knob to the off po-
sition “

”.

IMPORTANT:

When using the fan motor toge-

ther with the oven gas burner, switch on the

fan only after the ignition of the gas burner.

Cooking With Fan Assisted Gas Oven

(

Oven Burner and Fan Motor - fig. 2.8)

After the ignition of the gas burner, close the

oven door and switch on the fan motor.

Before introducing the food, preheat the oven

to the desired temperature.

For a correct preheating operation, it is advi-

sable to remove the tray from the oven and

introduce it together with the food, when the

oven has reached the desired temperature.

Check the cooking time and turn off the oven

5 minutes before the theoretical time to recu-

perate the stored heat.

Defrosting Frozen Foods

(Fan Motor Only - fig. 2.9)

Switch on the fan motor only.

The oven thermostat control knob shall be in
the “

” (off) position.

The defrosting is done by simple ventilation

without heat.

Fig. 2.8

Fig. 2.9

Fig. 2.7

Содержание KS 100 G









































Результаты поиска

Содержание KS 100 G

Отзывы:

Похожие инструкции для KS 100 G

Бренды по названию

Популярные бренды

Kenwood KS 100 G, Инструкция по использованию - Рекомендации по установке

Результаты поиска

Содержание KS 100 G

Отзывы:

Похожие инструкции для KS 100 G

Бренды по названию

Популярные бренды