Kenwood KS 100 G, Инструкция по использованию - Рекомендации по установке

Страница: 17 / 40

17
Replacing the Oven Lamp
WARNING: Ensure the appliance is switched off before replacing the lamp to avoid
the possibility of electric shock.
−
Let the oven cavity and the heating elements to cool down.
−
Switch off the electrical supply.
−
Remove the protective cover “
A
” (fig. 4.3).
−
Unscrew and replace the bulb “ B ” with a new one suitable for high temperatures
(300°C) having the following specifications: 230V or 220-240V, E14 and same power
(check watt power as stamped in the bulb itself) of the replaced bulb.
−
Refit the protective cover “ A ”.
Note: Oven bulb replacement is not covered by your guarantee.
Assembling and Dismantling of the Side Runner Frames
−
Fit the side runner frames into the holes on the side walls inside the oven (fig. 4.1).
−
Slide the drip pan and rack into the runners as shown in fig. 4.2.
The rack must be fitted so that the safety catch, which stops it sliding out, faces the
inside of the oven.
−
To dismantle, operate in reverse order.
A
B
Fig. 4.3
Fig. 4.2 Fig. 4.1