Kenwood KRC-21SA, Инструкция по эксплуатации

Страница: 7 / 48

The faceplate of the unit can be detached and taken with you,
helping to deter theft.
Removing the Faceplate
Press the Release button.
The faceplate is unlocked, allowing you to detach it.
• The faceplate is a precision piece of equipment and can be
damaged by shocks or jolts. For that reason, keep the faceplate in
its special storage case while detached.
• Do not expose the faceplate or its storage case to direct sunlight
or excessive heat or humidity. Also avoid places with too much
dust or the possibility of water splashing.
Reattaching the Faceplate
1
Align the projections on the unit with the grooves on the
faceplate.
2
Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you to use the unit.
Theft Deterrent Faceplate
1
Select the clock display
Press the [CLK] button.
2
Enter clock adjustment mode
Press the [CLK] button for at least 2 seconds.
The clock display blinks.
3
Adjust the hours
Press the [FM] or [AM] button.
Adjust the minutes
Press the [
4
] or [
¢
] button.
4
Exit clock adjustment mode
Press the [CLK] button.
Adjusting Clock
Switching the displayed information.
Press the [CLK] button.
Each time the button is pressed it switches between clock
display and current source.
During clock display the clock indicator is ON.
Switching Clock Display
Adjustment Item Display Range
Bass level "BAS" –4 — 4
Treble level "TRE" –4 — 4
Balance "BL" Left 15 — Right 15
Fader "FD" Rear 15 — Front 15
5
Exit Audio Control mode
Press the [A.ADJ] button.
— 7 —
B64-2381-00 02.9.25 2:44 PM Page 7