English
|
27
The messages shown below display your
systems condition.
EJECT:
No disc magazine has been loaded in
the changer. The disc magazine is not
completely loaded.
➪
Load the disc magazine properly.
No CD in the unit.
➪
Insert the CD.
NO DISC:
No disc has been loaded in the disc
magazine.
➪
Load a disc into the disc magazine.
TOC ERR:
No disc has been loaded in the disc
magazine.
➪
Load a disc into the disc magazine.
The CD is quite dirty. The CD is upside-
down. The CD is scratched a lot.
➪
Clean the CD and load it correctly.
READ ERR:
• The number of files or folders which are
stored in the connected USB device is
above the limitation.
• The file system of the connected USB
device is broken.
➪
Copy the files and folders for the
USB device again referring to www.
kenwood.com/usb/. If the error
message is still displayed, initialize the
USB device or use other USB devices.
E-05:
The CD is upside-down.
➪
Load the CD correctly.
BLANK:
Nothing has been recorded on the MD.
NO TRACK:
No tracks are recorded on the MD,
although it has a title.
NO PANEL:
The faceplate of the slave unit being
connected to this unit has been removed.
➪
Replace it.
E-77:
The unit is malfunctioning for some reason.
➪
Reset the unit. If the "E-77" code does
not disappear, consult your nearest
service center.
E-99:
Something is wrong with the disc
magazine. Or the unit is malfunctioning for
some reason.
➪
Check the disc magazine. And then
reset the unit. If the "E-99" code does
not disappear, consult your nearest
service center.
LOAD:
Discs are being exchanged in the Disc
changer.
HOLD:
The protective circuit in the unit activates
when the temperature inside the
automatic disc changer exceeds 60°C
(140°F), stopping all operation.
➪
Cool down the unit by opening
the windows or turning on the air
conditioner. As the temperature falls
below 60°C (140°F), the disc will start
playing again.
NA FILE:
An Audio file is played with a format that
this unit can’t support.
➪
----
COPY PRO:
A copy-protected file is played.
➪
----
NO DVICE:
The USB device is selected as a source
although no USB device is connected.
➪
Change the source to any source other
than USB. Connect an USB device, and
change the source to USB again.
NA DVICE:
An unsupported USB device is connected.
➪
For the supported USB devices, refer to
<About USB device> (page 5).
NO MUSIC/ E-15:
• Media was played that doesn’t have data
recorded that the unit can play.
• The connected USB device contains no
playable audio file.
➪
Use media that has data recorded that
the unit can play.
USB ERR:
The connected USB device is rated a
current capacity higher than the allowable
limit.
➪
Check the USB device with reference to
<About USB device> (page 5).
Some trouble may have occurred to the
connected USB device.
➪
Remove the USB device and then
reconnect it. When the same message
displays again, use another USB device.
B64-3422-00̲E̲English.Indd 27
B64-3422-00̲E̲English.Indd 27
06.4.25 9:52:21 AM
06.4.25 9:52:21 AM
Содержание KOS-A200 - Car Audio Expansion Module
Страница 29: ...B64 3422 00 E English Indd 29 B64 3422 00 E English Indd 29 06 4 25 9 52 22 AM 06 4 25 9 52 22 AM ...
Страница 57: ...B64 3422 00 French Indd 57 B64 3422 00 French Indd 57 06 4 25 9 51 23 AM 06 4 25 9 51 23 AM ...
Страница 85: ...B64 3422 00 German Indd 85 B64 3422 00 German Indd 85 06 4 25 9 51 54 AM 06 4 25 9 51 54 AM ...
