Kenwood KMM-BT222U, Инструкция по эксплуатации

Страница: 9 / 128

ENGLISH
5
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
TUNER SETTING
PRESET TYPE NORMAL : Memorizes one station for each preset button in each band (FM1/
FM2/FM3/AM). ; MIX : Memorizes one station or SiriusXM channel for each preset
button, regardless of the selected band or SiriusXM channel.
SYSTEM
KEY BEEP ON : Activates the keypress tone. ; OFF : Deactivates.
SOURCE SELECT
PANDORA SRC
(Except for )
ON : Enables PANDORA FRONT/PANDORA REAR/PANDORA in source selection. ;
OFF : Disables. ( 12)
IHEART SRC (Except for )
ON : Enables IHEARTRADIO-F/IHEARTRADIO-R/IHEARTRADIO in source selection. ;
OFF : Disables. ( 13)
SPOTIFY SRC ON : Enables SPOTIFY FRONT/SPOTIFY REAR/SPOTIFY in source selection. ;
OFF : Disables. ( 14)
BUILT-IN AUX ON : Enables AUX in source selection. ; OFF : Disables. ( 11)
F/W UPDATE
UPDATE SYSTEM/UPDATE HD (for )
F/W UP xxxx/
F/W UP Vxx YES : Starts upgrading the firmware. ; NO : Cancels (upgrading is not activated).
For details on how to update the firmware, visit <www.kenwood.com/cs/ce/>.
FACTORY RESET YES : Resets the settings to default (except the stored station). ; NO : Cancels.
CLOCK
CLOCK DISPLAY (Except for )
ON : The clock time is shown on the display even when the unit is turned off. ;
OFF : Cancels.
ENGLISH Select the display language for [FUNCTION] menu and music information if
applicable.
By default,
[ENGLISH] is selected.
ESPANOL
Register the marine remote ID
(for )
Applicable only when you connect Kenwood Marine Remote
Control unit (KCA-RC55MR, optional accessory) to this unit.
• For connection,
38, Connecting external components
.
• Refer also to the supplied instruction manual of the Kenwood
Marine Remote Control unit for more information.
Preparation:
Press repeatedly to enter STANDBY, then press the volume
knob to enter
[FUNCTION].
1
Turn the volume knob to select an item, then press the knob.
[SYSTEM] [REM SETTING] [REMOTE ID SET]
Remote control ID list is displayed.
•
[YES]
indicates that this ID is already registered.
• [NO] indicates that this ID is available.
2
Turn the volume knob to select an available ID [REM ID1] /
[REM ID2]
/
[REM ID3]
, then press the knob
.
“REGISTERING” appears on the display window.
To register, on the Kenwood Marine Remote Control unit:
• Press ENTER to register as [REM ID1] .
• Press SRC to register as
[REM ID2]
.
• Press DISP to register as
[REM ID3]
.
Once the ID is registered, “COMPLETED” appears.
To delete the registered ID
1 Turn the volume knob to select an item, then press the knob.
[SYSTEM] [REM SETTING] [REMOTE ID DEL]
2
Turn the volume knob to select the ID to delete [ ID1 DELETE] /
[
ID2 DELETE]
/[
ID3 DELETE]
, then press the knob.
3 Turn the volume knob to select
[YES]
to delete the selected
ID, and select [NO] to cancel.
• To exit, press and hold .
• To return to the previous setting item, press .
GETTING STARTED
JS_KWD_KMM_BT522HD_KN_EN_9.indd 5 JS_KWD_KMM_BT522HD_KN_EN_9.indd 5 7/7/2017 11:24:50 AM 7/7/2017 11:24:50 AM