Kenwood KMM-BT206, Инструкция по эксплуатации

Страница: 25 / 164

ENGLISH
17
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
The following operations may differ or be unavailable depending on the
connected phone.
To On the faceplate On the remote control
First incoming call...
Answer a call
Press or the
volume knob or
one of the number
buttons (1 to 6). Press .
Reject a call
Press .
Press .
End a call
Press .
Press .
While talking on the first incoming call...
Answer another
incoming call and hold
the current call
Press . Press .
Reject another incoming
call
Press .
Press .
While having two active calls...
End current call and
activate held call
Press .
Press .
Swap between the
current call and held call Press . Press .
Adjust the phone
volume*1
[00] to [35] (Default: [15] )
Turn the volume
knob during a call. Press VOL *2 or
VOL during a call.
Switch between hands-
free and private talk
modes*3
Press 6
IW
during
a call.
( Not available )
Bluetooth®
*1 This adjustment will not affect the volume of the other sources.
*2 Press and hold VOL
to continuously increase the volume to 15.
*3 Operations may vary according to the connected Bluetooth device.
Improve the voice quality
While talking on the phone...
1
Press the volume knob to enter [FUNCTION] .
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected or activated.
4
Press and hold to exit.
To return to the previous setting item, press .
Default: [XX]
[MIC GAIN] [LEVEL –10] to [LEVEL +10] ( [LEVEL –4] ): The sensitivity of the
microphone increases as the number increases.
[NR LEVEL] [LEVEL –5] to [LEVEL +5] ( [LEVEL 0] ): Adjust the noise reduction level
until the least noise is being heard during a phone conversation.
[ECHO CANCEL] [LEVEL –5] to [LEVEL +5] ( [LEVEL 0] ): Adjust the echo cancellation
delay time until the least echo is being heard during a phone conversation.
Make the setting for answering a call
1 Press to enter Bluetooth mode.
2
Turn the volume knob to select [SETTINGS] , then press the knob.
3 Turn the volume knob to select [AUTO ANSWER] , then press the knob.
4
Turn the volume knob to select the time (in seconds) for the unit to
answer the call automatically, then press the knob.
[01] to [30] , or select [OFF] to cancels. (Default: [OFF] )
5 Press and hold to exit.
To return to the previous setting item, press .
JS_KWD_KMM_BT356_EN_EN.indd 17 JS_KWD_KMM_BT356_EN_EN.indd 17 6/21/2019 4:01:20 PM 6/21/2019 4:01:20 PM