ENGLISH
5
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
GETTING STARTED
Default:
XX
DISPLAY
EASY MENU
When entering
[FUNCTION]
...
ON
: ZONE 1 illumination changes to white color. ;
OFF
: ZONE 1 illumination remains as
[COLOR SELECT]
color.
( 26)
•
ZONE 2 illumination changes to white color when you enter
[FUNCTION]
,
irregardless of the
[EASY MENU]
setting.
•
Refer to the illustration on page 25 for ZONE identification.
TUNER SETTING
DAB L-BAND
*
1
ON
: Receives L-BAND ensemble during digital audio reception. ;
OFF
: Cancels.
DAB ANT
POWER
ON
: Supplies power to the DAB antenna. Selects when using the supplied
antenna. ;
OFF
: Does not supply power. Selects when using passive antenna
without booster.
( 36)
PRESET TYPE
NORMAL
: Memorizes one station for each preset button in each band (FM1/FM2/
FM3/AM/SW1/SW2/DB1/DB2/DB3). ;
MIX
: Memorizes one station (digital radio or
analog radio) for each preset button, regardless of the selected band.
SYSTEM
KEY BEEP
*
2
ON
: Activates the keypress tone. ;
OFF
: Deactivates.
TDF ALARM
*
2
ON
: Activates the alarm if you forget to detach the faceplate when ACC is set to
OFF. ;
OFF
: Deactivates.
SOURCE SELECT
PANDORA SRC
ON
: Enables PANDORA in source selection. ;
OFF
: Disables.
( 13)
BUILT-IN AUX
ON
: Enables AUX in source selection. ;
OFF
: Disables.
( 12)
CD READ
1
: Automatically distinguishes between audio file disc and music CD. ;
2
: Forces to play as a music CD. No sound can be heard if an audio file disc is
played.
*
1
This feature is not supported when using the supplied DAB antenna (without L-band support).
To use this feature, separately purchase a DAB antenna (with L-band support).
*
2
Not applicable if 3-way crossover is selected.
F/W UPDATE
UPDATE SYSTEM/UPDATE DAB1/UPDATE DAB2
F/W UPDATE xxxx/
F/W UPDATE xxxxx/
F/W UPDATE Vxxx
YES
: Starts upgrading the firmware. ;
NO
: Cancels
(upgrading is not activated). For details on how to update
the firmware, visit <www.kenwood.com/cs/ce/>.
FACTORY RESET
YES
: Resets the settings to default (except the stored
station). ;
NO
: Cancels.
CLOCK
CLOCK DISPLAY
ON
: The clock time is shown on the display even when
the unit is turned off. ;
OFF
: Cancels.
ENGLISH
Select the display language for
[FUNCTION]
menu and
music information if applicable.
By default,
[ENGLISH]
is selected.
ESPANOL
Change the crossover type
1
Press
repeatedly to enter STANDBY.
2
Press and hold number buttons
4
and
5
to enter crossover
select.
The current crossover type appears.
3
Turn the volume knob to select “2WAY” or “3WAY”, then
press the knob.
4
Turn the volume knob to select “YES” or “NO”, then press the
knob.
The selected crossover type appears.
• To cancel, press and hold
.
• To adjust the selected crossover settings,
( 23, 24)
.
Caution
Select a crossover type according to how the speakers are connected
( 35)
.
If you select a wrong type:
• The speakers may damage.
• The output sound level may be extremely high or low.
JS_KWD_KDC_X7100DAB_XN_EN_3.indd 5
JS_KWD_KDC_X7100DAB_XN_EN_3.indd 5
12/14/2016 9:18:26 AM
12/14/2016 9:18:26 AM
