ENGLISH
15
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
• This unit supports Secure Simple Pairing (SSP).
• Up to five devices can be registered (paired) in total.
• Once the pairing is completed, the Bluetooth device will remain
registered in the unit even if you reset the unit. To delete the paired
device,
19, [DEVICE DELETE]
.
• A maximum of two Bluetooth phones and one Bluetooth audio device
can be connected at any time.
However, while in BT AUDIO source, you can connect to five Bluetooth
audio devices and switch between these five devices.
( 20)
• Some Bluetooth devices may not automatically connect to the unit
after pairing. Connect the device to the unit manually.
• Refer to the instruction manual of the Bluetooth device for more
information.
Auto Pairing
When you connect iPhone/iPod touch/Android device to the USB input
terminal, pairing request (via Bluetooth) is automatically activated.
Press the volume knob to pair once you have confirmed the device
name.
Automatic pairing request is activated only if:
– Bluetooth function of the connected device is turned on.
–
[AUTO PAIRING]
is set to
[ON]
.
( 19)
– KENWOOD MUSIC PLAY application is installed on the Android device
( 10)
and
[BROWSE MODE]
is selected.
( 11)
BLUETOOTH®
Connect with a remote device by One-touch (NFC)
Near Field Communication (NFC) enables short-range wireless
communication between the unit and remote devices such as
smartphones.
By holding an NFC-compatible remote device near to the N-Mark on
the unit (right side of the panel), the unit and remote device proceed
to complete pairing and established the BLUETOOTH connection
automatically.
1
Activate the NFC function on the remote device.
Refer to the instruction manual of the remote device for more
information.
2
Hold the remote device near to the N-Mark on the unit (right side of
the panel).
The device vibrates when pairing is completed.
• Depending on the type of remote device used, the strength of the NFC
signal may vary. For a stronger NFC signal, user must understand the
position of the remote device’s NFC antenna and hence tap the NFC
antenna with the NFC logo.
• To disconnect, hold the remote device near to the N-Mark on the unit
again.
• This unit only can recognize and connect to one NFC-compatible device
at a time.
JS_KWD_KDC_X7100DAB_XN_EN_3.indd 15
JS_KWD_KDC_X7100DAB_XN_EN_3.indd 15
12/14/2016 9:18:28 AM
12/14/2016 9:18:28 AM
