Kenwood KDC-X7100DAB, Инструкция по эксплуатации

Страница: 19 / 40

ENGLISH
19
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
BLUETOOTH®
Other settings
1
Press the volume knob to enter [FUNCTION] .
2
Turn the volume knob to select an item (see the following table), then press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow the instructions
stated on the selected item.
4
Press and hold to exit.
To return to the previous setting item, press .
Default:
XX
BT MODE
PHONE SELECT Selects the phone or audio device to connect or disconnect.
“
* ” appears in front of the device name when connected.
“ “ appears in front of the current playback audio device.
• You can only connect a maximum of two Bluetooth phones and one Bluetooth audio device at
any time.
AUDIO SELECT
DEVICE DELETE
1
Turn the volume knob to select a device to delete, then press the knob.
2 Turn the volume knob to select [YES] or [NO] , then press the knob.
PIN CODE EDIT
(0000) Changes the PIN code (up to 6 digits).
1
Turn the volume knob to select a number.
2 Press
S
/
T
to move the entry position.
Repeat steps
1
and
2
until you finish entering the PIN code.
3 Press the volume knob to confirm.
RECONNECT ON : The unit automatically reconnect when the last connected Bluetooth device is within range. ;
OFF : Cancels.
AUTO PAIRING ON : The unit automatically pair supported Bluetooth device (iPhone/iPod touch/Android device)
when it is connected through USB input terminal. Depending on the operating system of the
connected device, this function may not work. ;
OFF : Cancels.
INITIALIZE YES : Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.). ;
NO : Cancels.
Bluetooth test mode
You can check the connectivity of the supported
profile between the Bluetooth device and the unit.
• Make sure there is no Bluetooth device paired.
1 Press and hold .
“PLEASE PAIR YOUR PHONE PIN 0000” appears.
2
Search and select this unit model name
(KDC-X7
*** DAB) on the Bluetooth device.
3 Operate the Bluetooth device to confirm pairing.
“TESTING” flashes on the display.
The connectivity result (OK or NG) appears after the
test.
PAIRING: Pairing status
HF CONNECT: Hands-Free Profile (HFP)
compatibility
AUDIO CONNECT: Advanced Audio Distribution
Profile (A2DP) compatibility
PHONEBOOK DL: Phonebook Access profile (PBAP)
compatibility
To cancel test mode, press and hold to turn off
the unit.
JS_KWD_KDC_X7100DAB_XN_EN_3.indd 19 JS_KWD_KDC_X7100DAB_XN_EN_3.indd 19 12/14/2016 9:18:28 AM 12/14/2016 9:18:28 AM