28
Symptom
Cause
Remedy
The follow ing messages are displayed w hen certain problems are occurring in your
system. Take the recommended actions.
01 E:
No disc magazine has been loaded in the changer. The disc magazine is not completely
loaded.
>
Load the disc magazine properly.
02 E:
No disc has been loaded in the disc magazine..
>
Load a disc into the disc magazine.
04 E:
No disc has been loaded in the disc magazine.
>
Load a disc into the disc magazine
The CD is quite dirty. The CD is upside-dow n. The CD is scratched a lot.
>
Clean the CD and load it correctly.
77 E:
The unit is malfunctioning for some reason.
>
Press the reset button on the unit. If the "E- 77"code does not disappear, consult
your nearest service center.
99 E:
Something is w rong w ith the disc magazine. Or the unit is malfunctioning for some
>
reason.Check the disc magazine. And then, press the reset button on the unit.
If the "E- 99" code does not disappear, consult your nearest service center.
0d E:
The protective circuit in the unit activates w hen the temperature inside the automatic
disc changer exceeds 60°C (140°F), stopping all operation.
>
Cool dow n the unit by opening the w indow s or turning on the air conditioner. As the
temperature falls below 60°C (140°F), the disc w ill start playing again.
The system is not connected properly.
Connect the system properly.
See "Connections" .(Page 22)
The specified track is not
played.
The player is set to RANDOM
PLAY/M AGAZINE RANDOM PLAY.
Turn off RANDOM PLAY/M AGAZINE
RANDOM PLAY.
The microcomputer does not function
correctly.
Press the Reset button of the display
unit.
No sound is heard even
though the information
concerning the CD auto-
changer is displayed.
Volume is set to minimum level.
Raise the volume level.
Sound quality is poor.
The recording of the disc is poor.
Try playing another disc. If the sound is
good, the fault w as w ith the original disc.
The disc is dirty or damaged.
Check and, if possible, clean the disc.
See "Cleaning your discs. (Page 6)"
T
ro
u
b
lesh
o
o
ti
n
g
g
u
id
e
Troubleshooting guide
http://www.usersmanualguide.com/