M odulation level / Dynamic control
1
To set the control mode
Hold dow n the RDM button on the
display unit for m ore than three
seconds.
The LEVEL indicator w ill light up and
the currently set modulation level w ill
be displayed.
• If this function is on, the functions
other than pow er on / off, reset,
and changing the transmission
frequency, cannot be operated.
• This function is not available w hen
the random play, repeat play, or
scan play function is on. Before
using this function, cancel the other
functions. This function cannot be
used w hile loading a disc (w hile the
play indicator is blinking).
2
To change the modulation level
Press the
4
or
3
button on the
display unit.
Each time the button is pressed, the
modulation level changes in the range
from 1 to 4. As the number
increases, the modulation level
increases. The initial setting is 2.
Dynam ic control
The unit comes w ith the prevention
of distortion function to reduce sound
distortion.
If the sound is distorted severely,
press the + button on the display unit
and then set the function to "2" (ON).
If the prevention of distortion function
is set to "2" (ON), the sound extension
is reduced.
The initial setting is "1" (OFF).
If a disc w ith a high recording level is
used, the sound may distort even if the
prevention of distortion function is set
to "2" (ON). In this case, reduce the
modulation level.
To cancel
Hold dow n the RDM button on the
display unit for m ore than three
seconds.
The LEVEL indicator w ill go off and
the modulation level change w ill take
effect. The control mode is
automatically cancelled if you do
nothing for 15 seconds.
20
C D A U T O C H A N G E R C O N T R O L L E R
REP
RDM
3
-
+
4
¢
PWR
'
M . R D M
D . R E P
T R A C K
D I S C
8
/
D . S C N
M H z
DISC
T R A C K
1
2
D ynam ic cont rol "1 "
D ynam ic cont rol "2 "
L E V E L
M odulation level
N OTE
Num ber for prevention
of distortion setting
2
CA U TION
N OTE
In
st
al
lat
io
n
http://www.usersmanualguide.com/
