Kenwood KDC-5060R, Инструкция по эксплуатации

Страница: 4 / 46

— 4 —
E
nglis
h
Safety precautions
• If you experience problems during
installation, consult your Kenw ood dealer.
• If the unit does not seem to be w orking right,
try pressing the reset button first. If that does
not solve the problem, consult your Kenw ood
dealer.
Cleaning the Unit
If the front panel gets dirty, turn off the
pow er and w ipe the panel w ith a dry silicon
cloth or soft cloth.
Do not w ipe the panel w ith a stiff cloth or a
cloth dampened by volatile solvents such as
paint thinner and alcohol. They can scratch
the surface of the panel and/or cause the
indicator letters to peel off.
2
CA U TION
N OTE
40W 4 x
MENU
PWR
OFF
SCAN RDM REP D.SCN M.RDM
NAME.S
PTY @
VOL ADJ
DISP/TEXT
LOUD ATT
DISC
TI
AM
AUDIO
SRC
FM
1 2 3 4 5 6
Reset button
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get
dirty, w ipe them w ith a dry, soft cloth.
Cleaning the CD Slot
As dust can accumulate in the CD slot, clean
it occasionally. Your CDs can get scratched if
you put them in a dusty CD slot.
Lens Fogging
Right after you turn on the car heater in cold
w eather, dew or condensation may form on
the lens in the CD player of the unit. Called
lens fogging, CDs may be impossible to play.
In such a situation, remove the disc and w ait
for the condensation to evaporate. If the unit
still does not operate normally after a w hilst,
consult your Kenw ood dealer.
The marking of products using lasers
(Except for some areas)
The label is attached to the chassis/case and
says that the component uses laser beams
that have been classified as Class 1. It means
that the unit is utilizing laser beams that are
of a w eaker class. There is no danger of
hazardous radiation outside the unit.
CLASS 1
LASER PRODUCT
Downloaded from:
http://www.usersmanualguide.com/