Kenwood KDC-5060R, Инструкция по эксплуатации

Страница: 36 / 46

— 36 —
E
nglis
h
Basic operations of remote control
(See page 8)
Optional for the KDC-6060R
Tuner M ode
• Num ber/ letter entry buttons
Press buttons #1-6 to recall preset stations.
During direct access tuning, use these buttons to input the
frequency of the station.
• TUNE buttons
Press the
4
button to make decreasing seeks (using the
preset tuning mode).
Press the
¢ button to make increasing seeks (using the preset
tuning mode).
• AM /FM button
Press the AM button to select the M W and LW bands.
Press the FM button to select and sw itch betw een FM 1, FM 2,
and FM 3 bands.
• DIRECT/OK button
Selects the direct access tuning mode, used to input
frequencies directly. Press this button again to cancel the mode
w hilst it is operating.
During Station name preset play mode, selects station.
• DNPP button
Enters and cancels the Station Name Preset Play mode.
D isc Cont rol M ode
• Num ber/ letter entry buttons
Used to specify the track (disc) number used in direct track
(disc) searches.
Used to enter letters during disc name preset.
• TRACK buttons
Press the TRACK
–
button to search through the tracks
backw ards.
Press the TRACK
+
button to search through the tracks
forw ards.
Used to move the cursor w hilst entering disc name.
• DISC buttons
Press the DISC
–
button to search through the discs backw ards.
Press the DISC
+
button to search through the discs forw ards.
Selects numbers and symbols w hilst entering disc name.
• 38 button
When a disc is playing, this button pauses the play.
Press the same button again to start play again.
Selects the type of characters at the time of entering the disc
name.
• OK button
During disc name input, stores the already input data in memory
and ends the input mode.
Selects disc during the disc name preset play mode.
• DNPP button
Enters and cancels the Disc Name Preset Play mode.
Downloaded from:
http://www.usersmanualguide.com/