ENGLISH
5
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
DISPLAY
EASY MENU
(For
)
When entering
[FUNCTION]
...
ON
: ZONE 1 illumination changes to white color. ;
OFF
: ZONE 1 illumination remains as
[COLOR SELECT]
color.
( 21)
•
ZONE 2 illumination changes to light blue color when you enter
[FUNCTION]
,
irregardless of the
[EASY MENU]
setting.
•
Refer to the illustration on page 21 for zone identification.
TUNER SETTING
PRESET TYPE
NORMAL
: Memorizes one station for each preset button in each band (FM1/
FM2/FM3/MW/LW). ;
MIX
: Memorizes one station for each preset button,
regardless of the selected band.
SYSTEM
KEY BEEP
*
ON
: Activates the keypress tone. ;
OFF
: Deactivates.
SOURCE SELECT
SPOTIFY SRC
ON
: Enables SPOTIFY in source selection. ;
OFF
: Disables.
( 10)
BUILT-IN AUX
ON
: Enables AUX in source selection. ;
OFF
: Disables.
( 7)
P-OFF WAIT
Applicable only when the demonstration mode is turned off.
Sets the duration when the unit will automatically turn off (while in standby
mode) to save the battery.
20M
: 20 minutes ;
40M
: 40 minutes ;
60M
: 60 minutes ;
– – –
: Cancels
CD READ
1
: Automatically distinguishes between audio file disc and music CD. ;
2
: Forces
to play as a music CD. No sound can be heard if an audio file disc is played.
F/W UPDATE
UPDATE SYSTEM
F/W UP xxxx
YES
: Starts upgrading the firmware. ;
NO
: Cancels (upgrading is not activated).
For details on how to update the firmware, visit <www.kenwood.com/cs/ce/>.
*
Not applicable if 3-way crossover is selected.
GETTING STARTED
FACTORY RESET
YES
: Resets the settings to default (except the stored station). ;
NO
: Cancels
CLOCK
CLOCK DISPLAY
ON
: The clock time is shown on the display even when the unit is
turned off. ;
OFF
: Cancels.
ENGLISH
Select the display language for
[FUNCTION]
menu and music
information if applicable.
By default,
[ENGLISH]
is selected.
РУССКИЙ
ESPANOL
Change the crossover type
1
Press
repeatedly to enter STANDBY.
2
Press and hold number buttons
4
and
5
to enter crossover
select.
The current crossover type appears.
3
Turn the volume knob to select “2WAY” or “3WAY”, then press
the knob.
4
Turn the volume knob to select “YES” or “NO”, then press the
knob.
The selected crossover type appears.
• To cancel, press and hold
.
• To adjust the selected crossover settings,
( 19)
.
Caution
Select a crossover type according to how the speakers are
connected.
( 30)
If you select a wrong type:
• The speakers may damage.
• The output sound level may be extremely high or low.
JS_KWD_KDC_320UI_EN_EN_7.indd 5
JS_KWD_KDC_320UI_EN_EN_7.indd 5
7/7/2017 1:54:28 PM
7/7/2017 1:54:28 PM
