32
K-531
Refer also to the instruction manual that comes with the external component.
z
This System can play PCM (32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz) digital signals.
z
External components
Preparation:
Connect an external component to the AUX PLAY IN or DIGITAL IN terminals
on the rear panel. Refer to “Other connections (commercially available
accessories)” for connection (P.9).
Starts playback
1
For playing a component connected to the AUX PLAY IN terminals:
Press [AUX].
You can also start playback on the main unit by pressing
z
[INPUT]
to
change the input source to “AUX”.
For playing a component connected to the DIGITAL IN terminal:
Press [D-IN].
You can also start playback on the main unit by pressing
z
[INPUT]
to
change the input source to “D-IN”.
When
z
[D-IN]
is selected, the input signal sampling frequency is
displayed.
2
Operate the connected external component to start
playback.
Adjusting the input level for AUX source
Use this adjustment when the volume from an external component is
z
noticeably higher or lower than other input sources at the same volume
setting.
1
Press [AUX].
You can also start playback on the main unit by pressing
z
[INPUT]
to
change the input source to “AUX”.
2
Operate the component connected to AUX PLAY IN
terminals to start playback.
3
Press [MODE].
4
Press [
2
] or [
3
] to select “INPUT LEVEL”, then press [ENTER].
5
Press [
5
] or [
∞
] to adjust the input level (–3 to +5), then
press [ENTER].
To change the display information
Press
[ DISPLAY ]
repeatedly.
Each time you press the button, the display changes as....
“AUX”
or
“D-IN”
=
Day/Clock
=
(back to the beginning)
K-531[E_X].indb 32
K-531[E_X].indb 32
12.8.1 11:40:12 AM
12.8.1 11:40:12 AM
