9
EN
ENGLISH
Using the CD/MP3-CD/WMA-CD
Loading a disc
1
Press
CD
button to select CD mode.
2
Press
0
open/close
button to open the CD
tray.
3
Place a disc into the tray with the label facing
up.
4
Press
0
open/close
button to close the CD
tray.
The total playtime and total number of tracks
will appear in the display.
5
To remove the disc, press
0
open/close
but-
ton, grasp the disc by its edges, and carefully
pull it out.
For MP3-CD and WMA-CD only
Load a MP3 or WMA format music disc on the
disc tray.
•
The total album number and total track num-
ber will appear on the display.
Notes:
•
To ensure good system performance; wait until the
unit completely reads the disc before proceeding.
•
If the CD tray is not loaded with a disc or the disc is
unreadable, the message “NO PLAY” will be shown.
•
For MP3-CD and WMA-CD, the disc reading time
may exceed 10 seconds due to the large number of
songs compiled into one disc.
•
For MP3-CD and WMA-CD, “A” on the display rep-
resents ALBUM.
•
For MP3-CD and WMA-CD, the total album number
on the display indicates the number of all the al-
bums recorded in the disc.
•
The icon “MP3” appears only when an MP3-file is
played. It does not appear when playing a WMA-file.
Playing a normal disc
1
Press
6
button to start playback.
The track number and elapsed playing time of
the current track appear on the display.
To interrupt playback, press
6
button.
The playing time will start flashing.
To resume playback, press
6
button again.
2
To stop playback, press
7
stop
button.
Selecting a desired track/passage
To select a desired track
Press
4
or
¢
button (
4
or
¢
SEARCH/SKIP/
TUNING
button on the remote control) repeatedly
until the desired track appears on the display.
•
If playback is stopped, press
6
button to start
playback.
•
The digit buttons (0~9) on the remote control
can also be used to select a track.
Press the digit buttons as shown below:
To select track 2 :
2
and
ENTER
To select track 23 :
2
,
3
and
ENTER
To select track 120
(MP3-CD and WMA-CD only) :
1
,
2
and
0
To search for a particular passage during
playback
Press and hold
4
or
¢
button (
4
or
¢
SEARCH/SKIP/TUNING
button on the remote
control) and released it when the desired passage
is located for CD.
Selecting a desired album/file
(For
MP3-CD and WMA-CD only)
To select a desired album
Press
p.call/album up
or
down
button on the
unit until the desired album number appears on
the display.
•
“Axxx xxx” will appear on the display. “Axxx”
indicates album number and “xxx” indicates
the file number.
To select a desired file
Press
4
or
¢
button (
4
or
¢
SEARCH/
SKIP/TUNING
button on the remote control) re-
peatedly until the desired file from the current al-
bum appears on the display.
•
“Axxx xxx” will appear on the display. “Axxx”
indicates album number and “xxx” indicates
the file number.
•
The digit buttons (0~9) on the remote control
can also be used to select a file.
5572/08-24/EN
05.3.29, 4:54 PM
9
