9
EN
ENGLISH
Using the CD/MP3-CD
Loading a disc
1
Press
CD
button to select CD/MP3 mode.
2
Press the area marked
push open
to open the CD door.
3
Place a CD/MP3 into the tray with the label
facing up.
4
Close the CD door.
The total playtime and total number of tracks
will appear in the display.
5
To remove the CD, press the area marked
push open
,
grasp the CD by its edges, and carefully pull it out.
For MP3-CD only
Load a MP3 format music disc on the disc tray.
•
The total album number and total file number
will appear on the display.
Notes:
•
To ensure good system performance; wait until the
unit completely reads the disc before proceeding.
•
If the CD compartment is not loaded with a CD/
MP3-CD or the CD/MP3-CD is unreadable, the mes-
sage “NO PLAY” will be blinking.
•
For MP3-CD, the disc reading time may exceed 10
seconds due to the large number of songs com-
piled into one disc.
•
For MP3-CD, “A” on the display represents ALBUM.
•
For MP3-CD, the total album number on the display indicates
the number of all the albums recorded in the MP3-CD.
Playing a normal disc
1
Press
6
button (
6
PLAY/PAUSE
button on
the remote control) to start playback.
The track number and elapsed playing time of the
current track appear on the display.
To interrupt playback, press
6
button (
6
PLAY/PAUSE
button on the remote control).
The playing time will start flashing.
To resume playback press
6
button (
6
PLAY/
PAUSE
button on the remote control) again.
2
To stop playback, press
7
button.
Selecting a desired track/passage
To select a desired track
Press
4
or
¢
button (
4
or
¢
SEARCH/
SKIP/TUNING
button on the remote control) re-
peatedly until the desired track appears on the
display.
•
If playback is stopped, press
6
button (
6
PLAY/PAUSE
button on the remote control)
to start playback.
•
The digit buttons (0~9) on the remote control
can also be used to select a track.
Press the digit buttons as shown below:
To select track 2 :
2
and
ENTER
To select track 23 :
2
,
3
and
ENTER
To select track 120 (MP3-CD only) :
1
,
2
and
0
To search for a particular passage during
playback
Press and hold
4
or
¢
button (
4
or
¢
SEARCH/SKIP/TUNING
button on the remote
control) and released it when the desired passage
is located for CD.
Selecting a desired album/file
(For
MP3-CD only)
To select a desired album
Press
p.call/album +
or
–
button on the unit until
the desired album number appears on the display.
•
“Axxx xxx” will appear on the display. “Axxx”
indicates album number and ”xxx” indicates
the file number.
To select a desired file
Press
4
or
¢
button (
4
or
¢
SEARCH/
SKIP/TUNING
button on the remote control) re-
peatedly until the desired file from the current al-
bum appears on the display.
•
“Axxx xxx” will appear on the display. “Axxx”
indicates album number and ”xxx” indicates
the file number.
•
The digit buttons (0~9) on the remote control
can also be used to select a file.
continued to next page
5521̲08̲20̲EN
04.6.30, 3:21 PM
9
