Kenwood HM-437MP, Инструкция по эксплуатации

Страница: 12 / 20

12
EN
ENGLISH
Using the CD/MP3-CD
Using the radio
Tuning in radio stations
1
Press TUNER/band button ( TUNER/BAND
button on the remote control) to select TUNER
mode.
The current radio frequency will be displayed.
2
Press TUNER/band button ( TUNER/BAND
button on the remote control) to select the
desired waveband: FM or AM.
3
Press and hold
4
or
¢
button (
4
or
¢
SEARCH/SKIP/TUNING button on the remote
control).
Repeat this procedure until the desired station
is reached.
To tune to a weak station briefly press
4
or
¢
button (
4
or
¢
SEARCH/SKIP/TUN-
ING button on the remote control) repeatedly
until the display shows the desired frequency
or when the best reception has been obtained.
Storing preset
You can store up to 20 for FM and 20 for AM radio
stations in the memory. When a preset radio sta-
tions selected. The preset number appears on the
display.
1
Press TUNER/band button ( TUNER/BAND
button on the remote control) to select TUNER
mode.
2
Press TUNER/band button ( TUNER/BAND
button on the remote control) to select the
desired waveband: FM or AM.
3
Press
4
or
¢
button (
4
or
¢
SEARCH/
SKIP/TUNING button on the remote control)
to tune to the desired frequency.
4
Press program button ( PROGRAM button on
the remote control) so that “– –” will start flash-
ing.
5
If you wish to store the radio station to another
preset number,
p.call/album + button ( P. CALL
+ button on the remote control) or p.call/al-
bum – button ( P. CALL – button on the remote
control) to select the desired preset number.
To repeat one album (For MP3-CD only)
Press repeat button ( REPEAT button on the re-
mote control) twice in play or pause mode.
The icon “REPEAT ALB.” will appear on the dis-
play.
• To cancel repeat play, repress repeat button
on the unit ( REPEAT button on the remote con-
trol) twice.
Note:
In program mode, you can only select repeat one or
repeat all function.
Intro scan
This function let you listen to the first 10 seconds
of each track throughout the disc.
Press INTRO button on the remote control to start
scanning, and the icon “INTRO” will appear on
the display.
To stop the intro scan
Press INTRO button on the remote control again.
The unit enters normal play mode and starts play-
ing from where you stop the scanning.
Using the RDS/DISPLAY button
Pressing RDS/display button on the unit ( RDS/
DISPLAY on the remote control) shows various
display information of the disc, such as time infor-
mation of the current track or a whole disc, pro-
gram number during program play, file and artist
name during MP3 mode, and etc.
5521̲08̲20̲EN 04.6.30, 3:21 PM 12