manualshive.com logo in svg

Kenwood HM-233, Инструкция по эксплуатации

Поделиться
Скачать
Kenwood HM-233 Скачать руководство пользователя страница 20

20

Radio

- Listening to the Radio -

Listening to the Radio

To receive an FM stereo transmission:

Press the FUNCTION (BAND) button to display the "ST" indicator.

l

" " will appear when an FM broadcast is in stereo.

 

 

l

If the FM reception is weak, press the FUNCTION (BAND) button to extinguish the
"ST" indicator. The reception changes to monaural, and the sound becomes
clearer.

After use:

Press the ON/STANDBY button to enter the power stand-by mode.

1

Press the ON/STANDBY button to turn the power on.

2

Press the FUNCTION button until "FM" or "AM" appears on the dis-
play.

When operating with the remote control, press the TUNER button, and then the 
BAND button to select "FM" or "AM".

3

Press the TUNING (  or  ) button to tune in to the desired station.

Manual tuning:

Press the TUNING button as many times as required to tune in to the desired 
station.

Auto tuning:

When the TUNING button is pressed for more than 0.5 seconds, scanning will 
start automatically and the tuner will stop at the first receivable broadcast station.

 

Notes:

l

This can be operated by pressing the TUNE (  or  ) button on the remote 
control.

l

When radio interference occurs, auto scan tuning may stop automatically at 
that point.

l

Auto scan tuning will skip weak signal stations.

l

To stop the auto tuning, press the TUNING button again.

FM stereo mode indicator

FM stereo receiving indicator

Содержание HM-233





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды