12
Preparation f
or Use
- Remote Contr
o
l -
Remote Control
n
Battery installation
Precautions for battery use:
l
Replace all old batteries with new ones at the same time.
l
Do not mix old and new batteries.
l
Remove the batteries if the unit will not be used for long periods of time. This will
prevent potential damage due to battery leakage.
Caution:
l
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
l
Installing the batteries incorrectly may cause the unit to malfunction.
Notes concerning use:
l
Replace the batteries if the operating distance is reduced or if the operation
becomes erratic. Purchase 2 "AAA" size batteries (UM-4, R03, HP-16 or similar).
l
Periodically clean the transmitter on the remote control and the sensor on the unit
with a soft cloth.
l
Exposing the sensor on the unit to strong light may interfere with operation.
Change the lighting or the direction of the unit.
l
Keep the remote control away from moisture, heat, shock, and vibrations.
n
Test of the remote control
Face the remote control directly to the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STANDBY button. Does the power turn on? Now, you can enjoy the
music.
1 Remove the battery cover.
2 Insert the batteries according to the direction indicated in the bat-
tery compartment.
When inserting or removing the batteries, push them towards the battery termi-
nals.
3 Replace the cover.
0.2 m - 6 m
(8" - 20')
Remote sensor
