20
Liquidiser
Use for blending soups, drinks, pâtés, mayonnaise and for chopping nuts and making crumbs from bread
and biscuits.
a.
Filler cap
b.
Lid
c.
Goblet and base combined
1.
Remove the outlet cover from the food processor by lifting off.
2.
Fit the lid and filler cap on the goblet (fig.18) by placing into position, and twisting both clockwise to
lock.
3.
Place the liquidiser on the outlet, engaging the lugs in the base in the slots provided. Turn clockwise
until it locks into position (fig. 19)
Note:- When using the liquidiser outlet ensure that there are are no tools in the processor bowl. The
liquidiser will only operate with the processor bowl and lid in position.
Hints:-
•
Cut dry ingredients into cubes, e.g. bread for breadcrumbs and feed them through the filler cap onto
revolving blades.
•
Recipes containing liquid can be placed directly into the liquidiser
•
Best results are obtained using a high speed.
•
When making mayonnaise, place all the ingredients with the exception of the oil into the liquidiser.
Remove the filler cap and with the motor running gradually add the oil in a steady stream.
•
Never exceed the maximum capacity on the liquidiser of 1 litre/ 1
3
⁄
4
pints.
IMPORTANT
•
For safety reasons we do not recommend the blending of very hot liquids
•
Do not place dry ingredients into the liquidiser before switching on
•
Various spices such as cloves, dill and cumin seeds have an adverse effect upon the liquidiser
plastic and should not be processed.
•
The liquidiser runs at such high speeds that all foods are processed within one minute.
•
Prolonged running or repeated use should be avoided especially when processing dry ingredients or small quantities.
•
The liquidiser is not suitable as a storage container therefore ingredients should not be left to stand in the goblet before processing and
should be removed immediately afterwards.
•
When switching off, wait until the blades have stopped revolving before removing the liquidiser.
Multi-Mill
The multi-mill attachment if supplied, can be used to blend baby food, make salad dressings, chop herbs and mill spices as well as milling
coffee beans.
a.
Base with fixed spring
d.
Blend and store jar
b.
Blade and housing assembly
e.
Max fill line
c.
Rubber seal
f.
Lid
1.
Remove the outlet cover from the food processor by lifting off.
2.
Place the jar, rim uppermost on the worktop and add the food to be milled
3.
Ensure that the rubber seal is correctly located in the recess of the blade and housing assembly.
4.
Invert the blade and housing assembly, and place so that the blades are submerged in the jar.
5.
Secure the assembly by screwing the base onto the jar until finger tight.
6.
Place the multi mill on the outlet, engaging the lugs in the base in the slots provided. Turn clockwise until it locks into position (fig.20).
Note:- When using the multi mill ensure that there are no tools in the processor bowl. The multi mill will only operate with the processor bowl
and lid in position.
18
19
a
b
c
a
b
c
d
e
f
10
Содержание FP670 series
Страница 2: ...FP670 series 1 2 4 3 6 5 7 8 ...
Страница 4: ...FP670 3 P 1 2 1 9 6 8 10 3 11 12 2 5 4 7 ...
