Kenwood DRV-830, Инструкция по эксплуатации

Страница: 8 / 25

How to Wire
Before performing the connection work, first check that the engine key is removed
and then be sure to disconnect the negative terminal of the battery to prevent a
short-circuit accident.
Use the Power Cable for Dashcam; CA-DR100 (optional accessory)
Ground cord (Black)
Connect to a metal part of the vehicle (part of the chassis with an electrical
connection to the negative side of the power supply).
Engine key switch
Fuse
Battery
Main fuse
GND
Accessory cord (Red)
Connect to a power supply that can be turned
on and off with the switch.
Battery cord (Yellow)
Connect to a power supply with a voltage that is always applied regardless
of whether or not the engine key is on or off at a point after the power has
passed through the main fuse.
Accessory power supply
Fuse (2 A)
Dashboard Camera
Connect the Dashboard Camera and power cord.
Cord length (3.5 m)
ACC
BATT
Connecting the cigarette lighter plug cord (accessory)
Cord length
(4 m)
Connect the dashboard camera and power cord of the cigarette lighter plug cord.
Dashboard Camera
Connect the cigarette lighter plug to the cigarette lighter socket.
When disconnecting the power cord, disconnect it while pressing the hook of the connector.
CAUTION
Fuse
(2 A)
Part Names and Functions
1
Power cord connector terminal
Connect the included cigarette lighter plug
cord or the CA-DR100 power cable for Dashcam
(optional accessory).
2
Bracket attachment part
Mount the included mount bracket.
3
Camera lens
4
Speaker
Outputs audio guidance, warning sounds and
the audio when files are played.
5
/SHORTCUT button
z
When pressed while the menu is displayed,
moves to the previous item.
z
When pressed while recording, displays the
shortcut menu.
z
When pressed and held while recording,
switches the recording mode (normal/low
frame rate).
➜ P. 33)
z
When pressed during playback, plays the
previous file.
z
Fast-reverses when pressed and held during
playback, slow-reverses when pressed and held
while paused. Switches to playback when the
button is released while fast-reversing, to pause
when released during slow-reverse playback.
1 2 3 4
5
6
8
7
9 0
! @
#
% $
Open the power cord connector terminal’s cover and connect the power cord.
After connecting the power cord, close the cover.
Open the power cord connector terminal’s cover and connect the power cord.
After connecting the power cord, close the cover.
14 15