Kenwood DRV-830, Инструкция по эксплуатации

Страница: 19 / 25

Configuring the Settings
Setting the date and time
Set the date and time.
1.
Press the [MENU/OK] button.
The menu is displayed.
2.
Operate the [ ] and [ ] buttons to
select <System settings>, then press
the [MENU/OK] button.
2
1
1
3.
Operate the [ ] and [ ] button
to select <Date/time>, then press the
[MENU/OK] button.
2
1
1
4.
Operate the [ ] and [ ] buttons to
select the item, then press the [MENU/
OK] button.
2
1
1
Automatic
Set the time zone.
The date and time are set
automatically according to the
date and time received from the
positioning satellite.
Manual
After setting the time zone, set the
date and time manually..
z
If “Automatic” was selected, the is
completed.
5.
Operate the [ ] and [ ] buttons
to input the date and time, then press
the [MENU/OK] button.
To return to the previous step, press the [ ]
button.
2
1
1
6.
Press the [MENU/OK] button while the
cursor is set to the seconds' position to
finish the procedure.
z
If “Automatic” was selected, the correct date and
time will not be set until the signal from the
positioning satellite can be properly received.
KENWOOD DRIVE REVIEWER is viewer software
for computers, allowing images recorded on the
camera to be displayed.
The application can be downloaded from the
Kenwood website.
Please visit
http://www.kenwood.com/cs/ce/
.
For the operating environment, please see Page 45.
Installing the software
1.
After downloading the application onto
the computer, double-click the installer,
then follow the instructions on the screen
to install KENWOOD DRIVE REVIEWER.
Playing files
1.
Eject the SD card from the camera, insert
it into the included SD card converter/
adapter, then connect it to the computer
using a card reader (commercially available).
2.
Launch KENWOOD DRIVE REVIEWER.
3.
Select the SD card drive from the list
of drives.
To play a file stored on the computer, select the
folder in which the file is stored using the <SELECT
FOLDER (S)> command in the FILE (F) menu.
4.
Select the file you want to play from
the [FILE], [EVENT] or [PHOTO] tab and
play the file.
FILE Displays all the files.
EVENT
Displays the event recording, manual
recording and parked recording files.
PHOTO
Displays the photos (still images)
taken with the camera.
5.
To quit, either press the [x] button or
select <EXIT (X)> from the FILE (F) menu.
KENWOOD DRIVE REVIEWER screen
Using the Viewer Software
4
1
6
7
8
9
0
!
5
@
2 3
**********************************
36 37