Kenwood DRV-830, Инструкция по эксплуатации

Страница: 21 / 25

Using the Viewer Software
Outputting still pictures from
the images
Any point in the currently playing video can be
captured and output as a still image.
1.
Select the file whose image you want
to capture and play it.
2.
Press the [ ] button at the point
you want to capture.
3.
Select the folder in which you want to
store the file and give the file a name.
4.
Press the [SAVE] button.
Outputting travel information
Outputs a travel information file (kml/kmz)
usable with the Google Earth map service.
1.
Select <EXPORT TO kmz/kml (E)> from
the FILE (F) menu.
2.
Select the folder in which you want to
back up the information, then select
“KML/KMZ” as the file type and give
the file a name.
3.
Press the [SAVE] button.
z
For usage instructions, see the Google
Earth map service's help.
Backing up files
Back up the files on SD cards onto a computer's
hard disk, etc., as necessary.
1.
Select <BACKUP (B)> from the FILE (F)
menu.
2.
Select the folder in which the files are to
be backed up.
3.
Check the files you want to save and
select the files to be stored.
4.
Press the [EXECUTE] button.
Find the corresponding symptom on the table below and take the appropriate measures. If you
cannot find a solution, contact your store of purchase or a Kenwood service center.
Common
Symptom Cause/Countermeasures
The power does not turn on.
z
The power to the vehicle's cigarette lighter socket is not turned on.
å
Turn on the vehicle's accessory (ACC) power switch or start the engine.
å
Check that the cigarette lighter plug is properly connected.
z
The fuse is blown.
å
After checking that no cords are short-circuited, replace with a fuse
of the same capacity. Contact your store of purchase.
z
The power cord is improperly connected.
å
Have the connection checked at your store of purchase.
z
Recording is not possible.
z
is displayed on
the screen.
z
No SD card is inserted.
z
An SD card other than one of size 8 to 128 GB is inserted.
z
An SD card not conforming to SDHC or SDXC standards is inserted.
z
The SD card has not been formatted.
å
Insert an SD card usable on this camera into the SD card slot.
å
If necessary, format the SD card on the camera. (
➜
P. 19)
z
The temperature inside the camera is too high.
å
Lower the temperature in the vehicle. This will deactivate the
protection circuit, and recording will then be possible.
The monitor screen turns off after
a while.
z
The monitor screen power-saving setting is set to off. (
➜
P. 34)
å
Change the setting.
z
The temperature inside the camera is too high.
å
Lower the temperature in the vehicle. The protection circuit will
be deactivated and forced turn-off of the monitor screen will be
canceled.
The camera's power does not turn off
even when the engine is turned off.
z
For some vehicles, etc., power to the cigarette lighter socket is
supplied even when the power is turned off.
å
Disconnect the cigarette lighter plug cord when leaving the vehicle.
The power cover has come off.
z
The cover has been pulled up strongly.
å
Insert the cover back into the original holes, then continue using
the camera as such.
Troubleshooting
40 41