Kenwood DRV-430, Инструкция по эксплуатации

Страница: 30 / 40

30
Message Cause/Solution
File cannot be played
•
A file that cannot be played was recorded for some reason.
•
Data can no longer be read due to a failure of the SD card.
å Back up any necessary data to a PC or other device, refer to
"Formatting an SD Card," and then format the SD card with the
device.
(
Á
P.13
)
Recording stopped due to high
temperature
•
Recording was not possible due the temperature of the device
rising.
å Reduce the temperature inside the vehicle. The protection
circuit operation will be canceled and recording will become
possible.
System will turn off due to high
temperature
•
The power was turned off for safety reasons due to the
temperature of the device rising.
å Reduce the temperature inside the vehicle. The protection
circuit operation will be canceled and recording will become
possible.
No update file available
•
There is no firmware data in the SD card.
å
Insert firmware data for the device in the SD card.
•
The update file in the SD card is the same as or older than the
current firmware version.
å
Insert the latest firmware data.
å
If the SD card contains the latest firmware data, an update is not
necessary because the firmware of the device is up to date.
System update failed
•
The update file could not be read properly from the SD card.
•
The update file is damaged.
å Format the SD card in the device, copy the update data to the
SD card again, and then perform the update operation again.
Troubleshooting
DRV-430_B5A-0959-01_EU_EN.indd 30 2017/12/21 12:13