![Kenwood DRV-430 Скачать руководство пользователя страница 13](http://html.mh-extra.com/html/kenwood/drv-430/drv-430_instruction-manual_190033013.webp)
13
Inserting and Removing an SD Card
Turn off the power of the device and then insert
an SD card into the SD card slot until you hear
a clicking sound. Be careful with regard to the
orientation of the card.
To remove the SD card, turn off the power of the
device and then press the SD card so that it pops
up and remove the SD card by pulling it out.
•
Be sure to format an SD card with the
device.
•
When an SD card is formatted, all files
including protected files are deleted.
•
Basically, SD cards essentially do not
require formatting. Format an SD card
only if errors occur when writing to or
reading from the SD card.
•
Do format SD cards on other than this
device.
•
Formatting an SD card will erase
all the data stored on that card,
includingprotected files. If your SD card
contains important data, save it to a PC
or other media before formatting it.
Turing the Power On/Off
Turning on the accessories power (ACC) switch
or starting the engine of the vehicle turns on
the power of the device and starts continuous
recording. Turning off the accessories power
(ACC) turns off the power of the device.
To Turn the Power On/Off Manually
When the accessories power (ACC) is on, the power
of the device can be turned on or off manually.
•
Hold down the [MENU/OK] button for at least 3
seconds while the device is on to turn off the power.
•
Hold down the [MENU/OK] button for at least 1
second while the device is off to turn on the power.
•
When the power has been turned off
manually, power is consumed because
the device is in standby.
Formatting an SD Card
Before using an SD card, first format (initialize) it
with the device.
1.
Insert the SD card into the SD card slot.
2.
Press the
[MENU/OK]
button.
MENU appears.
3.
Use the
[
J
]/[
K
]
buttons to select
<Format SD card>
and then press the
[MENU/OK]
button.
2
1
1
4.
Use the
[
J
]/[
K
]
buttons to select
<OK>
and then press the
[MENU/OK]
button.
2
1
1
5.
Press the
[MENU/OK]
button to end
the procedure.
Basic Operations
DRV-430_B5A-0959-01_EU_EN.indd 13
2017/12/21 12:13
Содержание DRV-430
Страница 2: ...2 Cov1 2_EN_DRV 430EU indd 2 2017 12 21 11 5 ...
Страница 37: ...37 DRV 430_B5A 0959 01_EU_EN indd 37 2017 12 21 12 1 ...
Страница 40: ...430Cov3 4 indd 2 2017 12 21 13 0 ...