ENGLISH
17
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Default:
[XX]
[SETTINGS]
[AUTO ANSWER] [1]
to
[30]
: The unit answers incoming call automatically in the selected
time (in seconds). ;
[OFF]
: Cancels.
[BATT/SIGNAL]
*
[AUTO]
: Shows the strength of the battery and signal on the supplementary
display (page 33) when the unit detects a Bluetooth device and the
Bluetooth device is connected. ;
[OFF]
: Cancels.
* Functionality depends on the type of the phone used.
Make a call
You can make a call from the call history, phonebook, or dialing the number.
Call by voice is also possible if your mobile phone has the feature.
1
Press to enter Bluetooth mode.
“(First device name)” appears.
• If two Bluetooth phones are connected, press again to switch to the
other phone.
“(Second device name)” appears.
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press and hold
to exit.
To return to the previous setting item, press
.
[CALL HISTORY]
(Applicable only if the phone supports PBAP.)
1
Press the volume knob to select a name or a phone number.
• “INCOMING,” “OUTGOING” or “MISSED” is shown on the lower part of
the display to indicate the previous call status.
• Press DISP to change the display category (NUMBER or NAME).
• “NO DATA” appears if there is no recorded call history or call number.
2
Press the volume knob to call.
Bluetooth®
Improve the voice quality
While talking on the phone...
1
Press the volume knob to enter
[FUNCTION]
.
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected or activated.
4
Press and hold
to exit.
To return to the previous setting item, press
.
Default:
[XX]
[MIC GAIN]
[LEVEL –10]
to
[LEVEL +10]
(
[LEVEL –4]
): The sensitivity of the
microphone increases as the number increases.
[NR LEVEL]
[LEVEL –5]
to
[LEVEL +5]
(
[LEVEL 0]
): Adjust the noise reduction level
until the least noise is being heard during a phone conversation.
[ECHO CANCEL]
[LEVEL –5]
to
[LEVEL +5]
(
[LEVEL 0]
): Adjust the echo cancellation
delay time until the least echo is being heard during a phone conversation.
Make the setting for receiving a call
1
Press to enter Bluetooth mode.
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected or activated.
4
Press and hold
to exit.
To return to the previous setting item, press
.
JS_KWD_DPX_M3200BT_EN_EN00.indd 17
JS_KWD_DPX_M3200BT_EN_EN00.indd 17
10/1/2019 10:32:15 AM
10/1/2019 10:32:15 AM
