Kenwood DNX9980HD, Инструкция по эксплуатации

Страница: 81 / 200

English 81
Next page
3
AV Output Interface Setup
You can set AV output parameters.
1 Display the AV-OUT Interface screen
Touch [ ]
>
[ ]
>
[AV-OUT Interface].
(page 72 )
2 Set each item
[AV-OUT]
Selects an AV source to be output at
the AV OUTPUT port. ( "VIDEO1")
⁄
• USB source cannot be selected when two iPods are
connected.
• iPod source cannot be selected when in Pandora source.
Camera Setup
You can set Camera parameters.
1 Display the Camera Setup screen
Touch [ ]
>
[ ]
>
[Camera SETUP]. (page
72 )
2 Set each item
[Rear Camera]
Selects the type of rear camera to
use. ( "Other")
"CMOS-300":
When the CMOS-300 with ID 1 set
is connected.
"Other":
When the other camera is connected.
[R-CAM Interruption]
Sets a method to switch
to the rear view camera video display. ( "OFF")
"ON":
Switches to the rear view camera video
display when engaging the shift knob of car to
"Reverse" and then pressing the [AUD] button
for longer than 1 second.
"OFF":
Switches to the rear view camera video
display, press the [AUD] button for longer than
1 second.
⁄
• The function of the [AUD] button needs to be
set to "CAM" in [AUD Key Longer than 1 Second]
beforehand.
[R-CAM Settings]
Adjusts the CMOS-300 with ID
1 set. For details, see the option manual.
[Front Camera]
Turn this setting on when the
CMOS-300 with ID2 set is connected. ( "OFF")
[F-CAM Settings]
Adjusts the CMOS-300 with ID
2 set. For details, see the option manual.