Kenwood DNX9980HD, Инструкция по эксплуатации

Страница: 68 / 200

68 DNX9980HD
Surround Control
You can set up the sound field.
1 Display the Surround Control screen
Touch [ ]
>
[ ]
>
[Surround Control].
(page 64 )
2 Set the Surround Control
1
1
Sets a sound field.
You can select any of the following sound fields.
"Bypass"/ "Center"/ "Dolby Pro Logic II
Movie"/ "Dolby Pro Logic II Music"/ "Dolby Pro
Logic II Matrix"
[Stream Information]
Displays the present
source information.
The stream (Dolby Digital, dts, Linear PCM, MPEG,
SDDS, AAC or MP3/WMA), input channels (front
or rear channels), and sampling frequency are
displayed.
⁄
• When you have selected the TV source and when you
set the Dolby PL, we recommend you to select the
"Dolby PLII Matrix" mode. If you select another Dolby
PLII mode, the sound is NOT output from rear speakers
when you receive monaural broadcasting sounds.
• Surround control can be set for each source.
• You can set the sound field when playback of a 2
channel (2/0) source.
Dolby Pro Logic II Music Adjustment
1 Display the Dolby Pro Logic II Music Adjust
screen
2 Adjust the sound field
[Dimension Control]
Sets the surround position
by adjusting the front and rear volume balance.
[Center Width Control]
Sets the vocal image
position by adjusting the right and left vocal
volume level.
[Panorama Mode]
Turns the Panorama mode
On or Off.
⁄
• You cannot use the <Surround Control Adjustment>
during playback of a Multi-channel source.
Audio Control