Kenwood DNX577S, Инструкция по эксплуатации

Страница: 45 / 202

USB/SD
45
English
Ñ
Remove the SD card
DNX997XR
1
Press the [
G
] button.
2
Touch
[
OPEN
]
to the panel fully opens.
3
Push the SD card until it clicks and then
remove your finger from the card. The
card pops up so that you can pull it out
with your fingers.
4
Press the
[
G
]
button.
DNX697S / DNX577S
Push the microSD card until it clicks and then
remove your finger from the card. The card
pops up so that you can pull it out with your
fingers.
Ñ
Usable SD card
DNX997XR
The unit is capable of playback of SD/SDHC/
SDXC memory cards complying with the SD,
SDHC or SDXC standard. A special adapter is
required to use a miniSD card, miniSDHC card,
microSD card, microSDHC, or microSDXC card.
The MultiMedia Card (MMC) cannot be used.
DNX697S / DNX577S
The unit is capable of playback of microSD/
microSDHC/microSDXC memory cards
complying with the microSD, microSDHC or
microSDXC standard.
USB/SD Basic Operation
Most functions can be controlled from the
source control screen and playback screen.
NOTE
• Set the remote controller mode switch to AUD
mode before starting operation, see Switch the
operation mode (P.104) .
Control screen
7
4
3
5
2
6
1
Open the drawer
5 7
Close the drawer
5
7
6
8
1
[
CODEC
]
/
[ ]
/
[ ]
• When a high-resolution source is played, its
format information is displayed.
•
[ ]
: Repeats the current track/folder. Each
time you touch the key, repeat modes are
switched in the following sequence:
File repeat (
), Folder repeat ( ), Repeat
all ( )
•
[ ]
: Randomly plays all tracks in the current
folder. Each time you touch the key, random
modes are switched in the following sequence:
File random (
), Random off ( )