20
DNX4280BT/5180/5280BT/5380/5380M
/5380BT/5580BT/6040EX/6180/6480BT/6980
Key Speci
fi
cation
UP
: Mute Level Up
DW
: Mute Level Down
■
Write : Write to the nonvolatile memory.
Cancel : Transfer to Service screen.
Return : Transfer to Service screen.
∗
Background color will be blue when “Write OK” is dis-
played.
∗
Background color will be red when “Write NG” is dis-
played.
∗
When adjusting the Tuner Mute Level, perform with the
following condition.
Set the frequency before transferring to the Tuner Mute
Level adjustment screen. (Even after completing adjust-
ment, the frequency remains the same.)
Audio Source : Tuner
LOUD
:
OFF
Volume
:
Step30
Frequency
: Default value of the set
2.2.3.7 DVS8700 Adjustment screen
This is to display DVS-8700 Servo Adjustment screen.
The DVS8700 Adjustment screen is displayed in Figure
2.2.3.7.
Offset Cancel
Inner Limit
Focus Height
Cancel
DVS8700 Adjust
DVS8700 Adjust
Adjust OK/NG
Return
Figure 2.2.3.7 DVS-8700 Adjustment screen
Key Speci
fi
cation
Offset Cancel
: Start the Offset Cancel Adjustment.
Note:
Active only when there is no disc and not
adjusting.
Inner Limit : Start the Inner Limit Adjustment.
Note:
Active only when there is no disc and not
adjusting.
Focus Height
: Start the Focus Height Adjustment.
Note:
Active only when there is disc, not ad-
justing, and mechanism power off.
Cancel
: Transfer to Service screen.
Return :
Transfer to the DVS8700 Adjustment screen.
(left screen in Figure 2.2.3.7)
∗
Background color will be blue when “Adjust OK” is dis-
played.
∗
Background color will be red when “Adjust NG” is dis-
played.
2.2.4 Touch Adjust screen
Fine-tune the variations of touch feeling in of each set.
Touch 2 markers one by one, and the adjustment is com-
pleted when the “Write OK” is shown on the screen.
If the “Write NG” is shown, transfer to the Test mode again
to re-start the adjustment from the
fi
rst step.
The Touch Adjustment screen is shown in Figure 2.2.4.
Cancel
Touch Adjust
Touch Adjust
Write OK/NG
Return
1-point
being input
2-point
being input
Figure 2.2.4 Touch Adjust screen
Key Speci
fi
cation
Cancel : Transfer to Test Mode Main screen.
Return : Transfer to Test Mode Main screen.
∗
Background color will be blue when “Write OK” is dis-
played.
∗
Background color will be red when “Write NG” is dis-
played.
2.2.5 Illumi Adjust screen
This screen is used to adjust the white color of the key il-
lumi.
This test is not performed for the models with “
°
” listed in
the Electrostatic touch column of Table 1.2.1.
The Illumi Adjustment screen is displayed in Figure 2.2.5.
Cancel
Table9
Table10
Table8
Table2
Next
Table1
Illumination Adjust
Illumination Adjust
Illumination Adjust
Illumination Adjust
Cancel
Adjustment value
Next
Down
Up
Write OK/NG
Return
Table3
Table10
Table4
Table2
Table5
Table4
Table6
Table2
Table7
Table6
Table8
Step1
Step2
Step3
RGB compensation value
Step1
Step2
Step3
Step4
Step0
Step1
Step2
Step3
Step4
Step1
Step2
Step3
Cancel
Next
Figure 2.2.5 Illumi Adjustment screen
TEST MODE
