Kenwood DM-3090 Скачать руководство пользователя

Страница: 16 / 48

DM-3090

TROUBLE SHOOTING

BLANK MD

Can't COPY

Can't EDIT

Can't REC

DEFECT

Din UNLOCK

DISC ERR

DISC FULL

FOCUS ERROR

MECHA ERR**

NAME FULL

NO DISC

NOT AUDIO

PLAYBACK MD

PROTECTED

TEMP OVER

TOC ERR**

TOC FULL**

TOC W ERROR

U TOC ERR**

U TOC W ERR

? DISC

0-00:00

**Number or symbol

Error messages

Meaning

Remedy

Nothing is recorded.

•

No copy can be made because of the SCMS copyright

system.

• A track cannot be edited.

• Recording cannot be pertormed correctly due to

vibration.

• Since this MD has scratches on it, the recording

operation was skipped.

• Poor connection of the digital cable.

• The disc damaged.
• The TOC information is not recorded on the disk or the

date contains.

• The MD is out of recording space.

• A MD has not been loaded.
• The disc data cannot be read.

• There is a mechanical problem and the disc is working

properly.

• The number of characters for the MD name or track

name exceeds 40.

• MD has not been loaded.
• MD data cannot be read.

• The data recorded on this disc is not audio data.

• You tried to record on a playback-only disc.

• The MD is write protected.

• The temperature is too high.

• The MD is excessively damages

• There is no space left for recording character infomation

(track names, disc names, etc.)

• Trouble has occurred.

• The TOC infomation on this disc does not meet the

MD specifications or it cannot be read.

• The TOC infomation could not be created properly due

to a mechanical shock or to scratches on the disc.

• The MD contains an error.

• Music is not being recorded.

• Replace the MD wiht a recoded disc.

• Record using the analogue cable.

• Change the stop position of the track and then try

editing it.

• Stop vibration and try again.

• Replace the disc with another recordable disc.

• Connect the digital cable securely.

• Reload the disc or replace it.

• Replace the disc with another recordable disc.

• Reload the MD.

• Reset the microprocessor referring to "If a problem

occurs".

• Shorten the MD or track name.

• Load a MD.
• Reload the MD.

• Select another track.
• Replace the MD.

• Raplace it with a recordable MiniDisc.

• Move the write protection tab back to its original

position.

• Turn off the power, and wait for a whilst.

• Replace the disc with another disc.

• Replace the MD with another recordable disc.

• Contact a KENWOOD Authorized Sevicing Dealer or

KENWOOD Authorized Sevice station.

• Replace it with another MD.
• Erase all the data, and try recording.

• Turn off the power, and try to write the TOC-

information again. (Remove any source of shock or
vibration whilst writing.)

• Replace the disc with another disc.

• Replace the disc with a recorded disc.

When an error message is displayed, proceed as follows:

DM-3090(K)

COVER

97.11.29

0:20

y [ W

Содержание DM-3090

















































Результаты поиска

Содержание DM-3090

Отзывы:

Похожие инструкции для DM-3090

Бренды по названию

Популярные бренды

Kenwood DM-3090, Руководство по обслуживанию

Результаты поиска

Содержание DM-3090

Отзывы:

Похожие инструкции для DM-3090

Бренды по названию

Популярные бренды