English
67
AV Interface Setup
You can set audio and visual (AV) interface
parameters.
Display the AV Interface screen
1
Touch [
]
>
[
]
>
[AV Interface]. (page 55)
Set each item
2
[AV-OUT]
Selects an AV source to be output at
the AV OUTPUT port. (
"AV-IN1")
[R-CAM Interrupt]
Sets a method to switch to
the rear view camera video display.
(
"OFF")
"ON": Switches to the rear camera video
display when "Reverse" gear is engaged.
"OFF": The monitor does not switch to the
rear view camera video display even
when engaging the shift knob of car to
"Reverse".
⁄
When in DVD source, "AV-OUT" cannot be set to USB.
•
When in USB source, "AV-OUT" cannot be set to DVD.
Navigation Setup
You can set Navigation parameters.
Display the Navigation Setup screen
1
Touch [
]
>
[
]
>
[Navigation]. (page 55)
Set each item
2
[NAV Interrupt Speaker]
Selects speakers
used for voice guidance of the navigation
system. (
"Front All")
"Front L": Uses the front left side speaker for
voice guidance.
"Front R": Uses the front right side speaker for
voice guidance.
"Front All": Uses both front speakers for voice
guidance.
[NAV Voice Volume]
Adjusts the volume for
voice guidance of the navigation system.
(
"21")
[NAV Mute]
Mutes the volume during voice
guidance of the navigation system.
(
"ON")
When turned "ON", the volume level drops for
voice guidance.
[Navigation Input]
Selects a navigation
system connection. (
"RGB")
"RGB": Allows the Kenwood’s Navigation
System to connect via its interface
cable.
"AV-IN": Allows a third-party navigation system
to connect via the AV INPUT1 port.
"OFF": Must be used if no navigation system is
connected.
(The navigation display is cancelled
when the AV source is switched.)
Next page
3
B64-4708-00̲00̲VW̲V̲En.indd 67
B64-4708-00̲00̲VW̲V̲En.indd 67
10.1.26 2:49:34 PM
10.1.26 2:49:34 PM