Settings
Settings
<Smartphone Setup>
Specify the connection method of Android/iPod/
iPhone.
1
Select the device type (
1
), then touch
[Change] (
2
).
Initial Information
Device Type Select
Device Type
Device Name
iPod / iPhone
Android / Other
Change
Connection Type
iPod / iPhone
Device Name
Bluetooth
Smartphone Setup
2
Select the connection method (
1
), then
confirm the selection ([OK] or [Next]) (
2
).
If
[iPod/iPhone]
is selected in step 1:
USB 1 Wire
Bluetooth
OK
Smartphone Setup
<Bluetooth Setup>
Configure settings for using a Bluetooth device, such
as connection and other general operations. For
details, see “Bluetooth settings” on page 39.
<OEM Setup>
(Only for
DDX395/DDX375BT
)
Get information, and change the settings for using the
ADS adapter.
<Beep>
•
ON
(Initial): Activates the key-touch tone.
•
OFF
: Deactivates the key-touch tone.
<SETUP Memory>
Memorize, recall, or clear the settings you have made.
• The memorized settings are kept even when the unit
is reset.
Touch
[Yes]
to display the setting screen, then select
an operation:
•
Recall
: Recalls the memorized settings.
•
Memory
: Memorizes the current settings.
•
Clear
: Clears the currently memorized settings.
•
Cancel
: Cancels.
A confirmation message appears. Touch
[Yes]
.
[USB 1 Wire]
Select this when the device is
connected via the USB input
terminal (cable from the rear
panel).
[Bluetooth]
Select this when the device is
connected via Bluetooth. (Go to
step 3.)
If
[Android/Other]
is selected in step 1:
Bluetooth
Next
Smartphone Setup
The
<Paired Device List>
screen appears. Go to
step 3.
3
When selecting [Bluetooth] as the
connection method: Select the device (
1
),
then press [OK] (
2
) to connect.
• If the device is already connected, skip step
1
.
Device Name 1
Device Name 5
Device Name 4
Device Name 3
Device Name 2
Remove
Connection
OK
Paired Device List
46
ENGLISH
EN̲DDX2018ST̲KR.indb 46
2017/05/17 9:28