17
DDX5022/5022Y/5032/5032M/512/52RY
DNX5120/512EX/5220/5220BT
TEST MODE
Key Speci
fi
cation
Information : Transfer to Information screen.
Service
: Transfer to Service screen.
Direct Select : Transfer to Direct Select screen.
Touch
: Transfer to Touch Adjust screen.
HPOSI
: Transfer to HPOSI Adjustment screen.
iPod
:
Transfer to iPod Authentication Chip Con
fi
r-
mation screen.
Auto Adjust : Transfer to Auto Adjust Menu screen.
Inverter
: Transfer to Inverter Con
fi
rmation screen.
NAVI
:
Transfer to Navigation MAP Update Con
fi
r-
mation screen.
Bluetooth :
Transfer to Bluetooth Confirmation screen
(only in the system running on the produc-
tion line).
3.2 Information screen
This screen is to display such information as version num-
ber and other conditions.
The contents displayed on the Information screen are
shown in Figure 3.2.
Return
Information
DNX (DDX or KVT)
Type :
∗
Region :
∗
Serial :
∗∗∗∗∗∗∗∗
DC Offset : None
Security : Off
Media Processor (Application) : Sep 15 2006 12:00:00
Decoder Firmware : V1.00
macrovision
: V1.00
Mstar
: V1.00
System uCom
: V
∗
.
∗∗∗
RPM : R–––– SPAN : *
BT Module : V
∗
.
∗∗∗
PIN CODE : 1234
Figure 3.2 Information screen
Key Speci
fi
cation
Return
: Transfer to Test Mode Main screen
3.3 Service screen
This screen is to show a variety of service information.
Pressing each [Clear] key is to clear the data saved in
E2PROM.
The contents displayed on the Service screen are shown in
Figure 3.3.
Return
Service
Serial
DVS-8000 Service
Tuner Mute Level
DVD/USB DivX
Registration Code Clear
∗
∗
∗
∗
DC Offset
Clear
None
■
Init
■
Init
Power on
∗∗∗
minutes
Monitor Open
∗∗∗
times
Figure 3.3 Service screen
Key Speci
fi
cation
Serial
:
Transfer to the screen to manually in-
put the Serial No.
DVS-8000 Service : Transfer to DVS-8000 Service Informa-
tion Display screen.
Tuner Mute Level : Transfer to Tuner Mute Level Adjust-
ment screen
DVD/USB DivX Registration Clear : Clear DVD DivX Regis-
tration Code.
DC Offset Clear : Clear DC Offset information in E2PROM.
■
Init :
Initialize Power On time and number
of Monitor Open.
Return
: Transfer to Test Mode Main screen
• DVD/USB DivX Registration Code
Display DivX Registration Code, and clear the Code with
[Clear] key.
After the clearing of the Code, display “None”.
∗
Clear the Code after ejecting the DISC.
• DC Offset
When the DC Offset detection information is shown as
“None”, it means that the offset is not detected. When it is
shown as “Detect (x)”, it means that the offset is detected.
X=0~3 : The number of capacitor leak detected.
Clear the detection information using the [Clear] key.
• Service Information
Display Power On time and the number of Monitor Open.
Pressing the [Init] key for 1 or more second initializes the
service information being displayed.
